Featured

Cup Thermoforming Machine Application The whole Plastic Cup Thermoforming Machine Mainly for the production of variety plastic containers ( jelly cups, drink cups, disposable cup, package containers, food bowl etc) with thermoplastic sheets, such as PP, PET, PS, PLA,etc. Cup Making Machine Feature Utilize hydraulic system and electrical technology control for servo stretching. It’s a high price ratio machine which was developed base on customer’s market demand.  The whole plastic cup making machine is controlled by hydraulic and servo, with inverter feeding, hydraulic driven system, servo stretching, these make it has stable operation and finish product with high quality. Thermoforming Cup Making Machine Technical Specifications  (Model) HEY11-6835 HEY11-7542 HEY11-8556 Forming Area 680x350mm 750x420 mm 850x560 mm Sheet width 600-710mm 680-750 mm 780-850 mm Max.forming depth 180mm 180 mm 180 mm Heating rated power 100KW 140KW 150KW Machine total weight 5T 7T 7T Motor power 10KW 15KW 15KW Dimension 4700x1600x3100mm Applicable raw material PP, PS, PET, HIPS, PE, PLA Sheet thickness 0.3-2.0mm Work frequency <35 times/minute Drive mode Hydraulic and pneumatic pressure Pressure supply 0.6-0.8 Air consumption 2200L/min Water consumption ≦0.5m3 Power supply Three Phase 380V/50HZ

Product Introduction Single Station Automatic Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature ● More efficient energy use and material utilization. ● The heating station uses high-efficiency ceramic heating elements. ● The upper and lower tables of the forming station are equipped with independent servo drives. ● Single Station Automatic Thermoforming machine has a pre-blowing function to make the product molding more in place. Key Specification Model HEY03-6040 HEY03-6850 HEY03-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6

PLC Pressure Thermoforming Machine With Three Stations HEY01 Product Introduction This Pressure Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature Mechanical, pneumatic and electrical combination, all working actions are controlled by PLC. Touch screen makes the operation convenient and easy. Pressure And/Or Vacuum forming. Thermoforming Machine: Upper and down mould forming. Servo motor feeding, feeding length can be step-less adjusted. High speed and accurate. Upper & lower heater, four sections heating. Heater with intellectual temperature control system,which has high precision, uniform temperature, won’t be effected by outer voltage.Low power consumption (energy saving 15%), ensure the longer service life of heating furnace. Forming and cutting unit mold open and close controlled by servo motor, products automatically count. Products be stacked downward. Plastic Thermoforming Machine: data memorization function. Feeding width can be synchronously or independently adjusted in electrical way. Heater will automatically push-out when the sheet is over. Auto roll sheet loading, reduce the working load. Plastic Thermoforming Machine Key Specification Model HEY01-6040 HEY01-6850 HEY01-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 3 Stations Forming, Cutting, Stacking Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Cutting Mould Stroke(mm) Upper Mould 150,Down Mould 150 Max. Cutting Area (mm2) 600x400 680x500 750x610 Cutting Force （ton） 40 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6 Max. Power of Whole Machine (kw) 150 Max. Machine Dimension(L*W*H) (mm) 11150×2300×2700 Weight of Whole Machine ( T ) ≈11 Brand of Main Components PLC Taiwan Delta Touch Screen Monitor (10 inch) Taiwan Delta Feeding Servo Motor (3kw) Taiwan Delta Forming Down Mould Servo Motor (3kw) Taiwan Delta Forming Upper Mould Servo Motor (3kw) Taiwan Delta Cutting Down Mould Servo Motor (3Kw) Taiwan Delta Cutting Upper Mould Servo Motor (5.5Kw) Taiwan Delta Stacking Servo Motor(1.5Kw) Taiwan Delta Heater (192 pcs) TRIMBLE AC Contactor French Schneider Thermo Relay Schneider Intermediate Relay Japan Omron Air Switch South Korea LS Pneumatic Component MAC. AirTAC/ ZHICHENG Cylinder China ZHICHENG   20 years experience GTMSMART Machinery Co., Ltd. is an innovative technology enterprise integrating technology, industry and trade. It mainly develops and produces various types of high-precision automatic production equipment. The newly developed GTM series of fully automatic air pressing molding production line includes: feeding unit, pre-heating unit, forming unit, vertical blanking unit, stack unit, scrap winding unit, punching cutting and stacking three-in-one horizontal blanking unit, online labeling unit, etc., which can be combined with flexible production line according to different production requirements of customers.

PLC Pressure Thermoforming Machine With Three Stations HEY01 Product Introduction This Pressure Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature Mechanical, pneumatic and electrical combination, all working actions are controlled by PLC. Touch screen makes the operation convenient and easy. Pressure And/Or Vacuum forming. Thermoforming Machine: Upper and down mould forming. Servo motor feeding, feeding length can be step-less adjusted. High speed and accurate. Upper & lower heater, four sections heating. Heater with intellectual temperature control system,which has high precision, uniform temperature, won’t be effected by outer voltage.Low power consumption (energy saving 15%), ensure the longer service life of heating furnace. Forming and cutting unit mold open and close controlled by servo motor, products automatically count. Products be stacked downward. Plastic Thermoforming Machine: data memorization function. Feeding width can be synchronously or independently adjusted in electrical way. Heater will automatically push-out when the sheet is over. Auto roll sheet loading, reduce the working load. Plastic Thermoforming Machine Key Specification Model HEY01-6040 HEY01-6850 HEY01-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 3 Stations Forming, Cutting, Stacking Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Cutting Mould Stroke(mm) Upper Mould 150,Down Mould 150 Max. Cutting Area (mm2) 600x400 680x500 750x610 Cutting Force （ton） 40 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6 Max. Power of Whole Machine (kw) 150 Max. Machine Dimension(L*W*H) (mm) 11150×2300×2700 Weight of Whole Machine ( T ) ≈11 Brand of Main Components PLC Taiwan Delta Touch Screen Monitor (10 inch) Taiwan Delta Feeding Servo Motor (3kw) Taiwan Delta Forming Down Mould Servo Motor (3kw) Taiwan Delta Forming Upper Mould Servo Motor (3kw) Taiwan Delta Cutting Down Mould Servo Motor (3Kw) Taiwan Delta Cutting Upper Mould Servo Motor (5.5Kw) Taiwan Delta Stacking Servo Motor(1.5Kw) Taiwan Delta Heater (192 pcs) TRIMBLE AC Contactor French Schneider Thermo Relay Schneider Intermediate Relay Japan Omron Air Switch South Korea LS Pneumatic Component MAC. AirTAC/ ZHICHENG Cylinder China ZHICHENG   20 years experience GTMSMART Machinery Co., Ltd. is an innovative technology enterprise integrating technology, industry and trade. It mainly develops and produces various types of high-precision automatic production equipment. The newly developed GTM series of fully automatic air pressing molding production line includes: feeding unit, pre-heating unit, forming unit, vertical blanking unit, stack unit, scrap winding unit, punching cutting and stacking three-in-one horizontal blanking unit, online labeling unit, etc., which can be combined with flexible production line according to different production requirements of customers.

PLC Pressure Thermoforming Machine With Three Stations HEY01 Product Introduction This Pressure Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature Mechanical, pneumatic and electrical combination, all working actions are controlled by PLC. Touch screen makes the operation convenient and easy. Pressure And/Or Vacuum forming. Thermoforming Machine: Upper and down mould forming. Servo motor feeding, feeding length can be step-less adjusted. High speed and accurate. Upper & lower heater, four sections heating. Heater with intellectual temperature control system,which has high precision, uniform temperature, won’t be effected by outer voltage.Low power consumption (energy saving 15%), ensure the longer service life of heating furnace. Forming and cutting unit mold open and close controlled by servo motor, products automatically count. Products be stacked downward. Plastic Thermoforming Machine: data memorization function. Feeding width can be synchronously or independently adjusted in electrical way. Heater will automatically push-out when the sheet is over. Auto roll sheet loading, reduce the working load. Plastic Thermoforming Machine Key Specification Model HEY01-6040 HEY01-6850 HEY01-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 3 Stations Forming, Cutting, Stacking Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Cutting Mould Stroke(mm) Upper Mould 150,Down Mould 150 Max. Cutting Area (mm2) 600x400 680x500 750x610 Cutting Force （ton） 40 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6 Max. Power of Whole Machine (kw) 150 Max. Machine Dimension(L*W*H) (mm) 11150×2300×2700 Weight of Whole Machine ( T ) ≈11 Brand of Main Components PLC Taiwan Delta Touch Screen Monitor (10 inch) Taiwan Delta Feeding Servo Motor (3kw) Taiwan Delta Forming Down Mould Servo Motor (3kw) Taiwan Delta Forming Upper Mould Servo Motor (3kw) Taiwan Delta Cutting Down Mould Servo Motor (3Kw) Taiwan Delta Cutting Upper Mould Servo Motor (5.5Kw) Taiwan Delta Stacking Servo Motor(1.5Kw) Taiwan Delta Heater (192 pcs) TRIMBLE AC Contactor French Schneider Thermo Relay Schneider Intermediate Relay Japan Omron Air Switch South Korea LS Pneumatic Component MAC. AirTAC/ ZHICHENG Cylinder China ZHICHENG   20 years experience GTMSMART Machinery Co., Ltd. is an innovative technology enterprise integrating technology, industry and trade. It mainly develops and produces various types of high-precision automatic production equipment. The newly developed GTM series of fully automatic air pressing molding production line includes: feeding unit, pre-heating unit, forming unit, vertical blanking unit, stack unit, scrap winding unit, punching cutting and stacking three-in-one horizontal blanking unit, online labeling unit, etc., which can be combined with flexible production line according to different production requirements of customers.

Product Introduction Four Stations Large PP Plastic Thermoforming Machine is forming, cutting and stacking in one line. It is completely driven by servo motor, stable operation, low noise, high efficiency, suitable for producing plastic trays, containers, boxes, lids, etc. Feature 1.PP Plastic Thermoforming Machine: High degree of automation, production speed. By installing the mold to produce different products, to achieve more purposes of one machine. 2.Integration of mechanical and electrical, PLC control, high precision feeding by frequency conversion motor. 3.PP Thermoforming Machine Imported famous brand electrical components, pneumatic components, stable operation, reliable quality, long using life. 4.The thermoforming machines has compact structure, air pressure, forming, cutting, cooling, blow out finished product feature set in one module, make the product process short, high finished product level, accord with national health standards. Key Specification Model GTM 52 4Station Maximum forming area 625x453mm Minimum forming area 250x200mm Maximum mold size 650x478mm Maximum mold weight 250kg Height over sheet material forming part 120mm Height under sheet material forming part 120mm Dry cycle speed 35 cycles/min Maximum film width 710mm Operating pressure 6 bar

Paper Cup & Bowl Sleeve Machine Technical Parameter Model Ultrasonic Paper Cup Sleeve Machine Paper Bowl Size 6 oz-16 oz (mold exchangeable) height up to 125 mm Raw Material 170-360 g/m2 PE paper, varnishing printed paper, or other film coated paper (can be sealed by ultrasonic) Rated Productivity 50-65pieces/minute; Power Source 220V/380V/ 50Hz or other required Total Power 4 KW Total Weight 1000KG Package Size(L x W x H) 2450 x1200 x2000mm; Working Air Source 0.6Mpa, Air Out-put:0.3 m3/minute

PLC Pressure Thermoforming Machine With Three Stations HEY01 Product Introduction This Pressure Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature Mechanical, pneumatic and electrical combination, all working actions are controlled by PLC. Touch screen makes the operation convenient and easy. Pressure And/Or Vacuum forming. Thermoforming Machine: Upper and down mould forming. Servo motor feeding, feeding length can be step-less adjusted. High speed and accurate. Upper & lower heater, four sections heating. Heater with intellectual temperature control system,which has high precision, uniform temperature, won’t be effected by outer voltage.Low power consumption (energy saving 15%), ensure the longer service life of heating furnace. Forming and cutting unit mold open and close controlled by servo motor, products automatically count. Products be stacked downward. Plastic Thermoforming Machine: data memorization function. Feeding width can be synchronously or independently adjusted in electrical way. Heater will automatically push-out when the sheet is over. Auto roll sheet loading, reduce the working load. Plastic Thermoforming Machine Key Specification Model HEY01-6040 HEY01-6850 HEY01-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 3 Stations Forming, Cutting, Stacking Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Cutting Mould Stroke(mm) Upper Mould 150,Down Mould 150 Max. Cutting Area (mm2) 600x400 680x500 750x610 Cutting Force （ton） 40 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6 Max. Power of Whole Machine (kw) 150 Max. Machine Dimension(L*W*H) (mm) 11150×2300×2700 Weight of Whole Machine ( T ) ≈11 Brand of Main Components PLC Taiwan Delta Touch Screen Monitor (10 inch) Taiwan Delta Feeding Servo Motor (3kw) Taiwan Delta Forming Down Mould Servo Motor (3kw) Taiwan Delta Forming Upper Mould Servo Motor (3kw) Taiwan Delta Cutting Down Mould Servo Motor (3Kw) Taiwan Delta Cutting Upper Mould Servo Motor (5.5Kw) Taiwan Delta Stacking Servo Motor(1.5Kw) Taiwan Delta Heater (192 pcs) TRIMBLE AC Contactor French Schneider Thermo Relay Schneider Intermediate Relay Japan Omron Air Switch South Korea LS Pneumatic Component MAC. AirTAC/ ZHICHENG Cylinder China ZHICHENG   20 years experience GTMSMART Machinery Co., Ltd. is an innovative technology enterprise integrating technology, industry and trade. It mainly develops and produces various types of high-precision automatic production equipment. The newly developed GTM series of fully automatic air pressing molding production line includes: feeding unit, pre-heating unit, forming unit, vertical blanking unit, stack unit, scrap winding unit, punching cutting and stacking three-in-one horizontal blanking unit, online labeling unit, etc., which can be combined with flexible production line according to different production requirements of customers.

Product Introduction Four Stations Large PP Plastic Thermoforming Machine is forming, cutting and stacking in one line. It is completely driven by servo motor, stable operation, low noise, high efficiency, suitable for producing plastic trays, containers, boxes, lids, etc. Feature 1.PP Plastic Thermoforming Machine: High degree of automation, production speed. By installing the mold to produce different products, to achieve more purposes of one machine. 2.Integration of mechanical and electrical, PLC control, high precision feeding by frequency conversion motor. 3.PP Thermoforming Machine Imported famous brand electrical components, pneumatic components, stable operation, reliable quality, long using life. 4.The thermoforming machines has compact structure, air pressure, forming, cutting, cooling, blow out finished product feature set in one module, make the product process short, high finished product level, accord with national health standards. Key Specification Model GTM 52 4Station Maximum forming area 625x453mm Minimum forming area 250x200mm Maximum mold size 650x478mm Maximum mold weight 250kg Height over sheet material forming part 120mm Height under sheet material forming part 120mm Dry cycle speed 35 cycles/min Maximum film width 710mm Operating pressure 6 bar

Product Introduction Single Station Automatic Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature ● More efficient energy use and material utilization. ● The heating station uses high-efficiency ceramic heating elements. ● The upper and lower tables of the forming station are equipped with independent servo drives. ● Single Station Automatic Thermoforming machine has a pre-blowing function to make the product molding more in place. Key Specification Model HEY03-6040 HEY03-6850 HEY03-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6