Featured

Application Paper cups produced by HEY18A single PE coated paper cup machine can be used for tea, coffee, milk, ice cream, juice and water. Features It’s the ideal equipment for producing single-sided coated paper cups. This paper cup forming machine has unique design with a guard cover for heat dissipation that ensures longer life span. It features easy operation, stable performance, small occupying area, low consumption and high efficiency. It can run stably with little noise. This single PE coated paper cup machine runs lots of procedures including automatic paper feeding, side sealing, oiling, bottom punching, bottom pre-heating, bottom folding, bottom knurling, top curling and cup discharging. Technical Parameter Model HEY110A Size 3-16 OZ Material One-side PE film coated/laminated paper Material Thickness 150-180g/㎡; ±20g/㎡ Rated Productivity 50-75 pcs/min Power supply 380v/220v 50hz Total Power 4.8kw Weight 1680KG Dimensions 2750*1320*1750MM

PLC Pressure Thermoforming Machine With Three Stations HEY01 Product Introduction This Pressure Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature Mechanical, pneumatic and electrical combination, all working actions are controlled by PLC. Touch screen makes the operation convenient and easy. Pressure And/Or Vacuum forming. Thermoforming Machine: Upper and down mould forming. Servo motor feeding, feeding length can be step-less adjusted. High speed and accurate. Upper & lower heater, four sections heating. Heater with intellectual temperature control system,which has high precision, uniform temperature, won’t be effected by outer voltage.Low power consumption (energy saving 15%), ensure the longer service life of heating furnace. Forming and cutting unit mold open and close controlled by servo motor, products automatically count. Products be stacked downward. Plastic Thermoforming Machine: data memorization function. Feeding width can be synchronously or independently adjusted in electrical way. Heater will automatically push-out when the sheet is over. Auto roll sheet loading, reduce the working load. Plastic Thermoforming Machine Key Specification Model HEY01-6040 HEY01-6850 HEY01-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 3 Stations Forming, Cutting, Stacking Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Cutting Mould Stroke(mm) Upper Mould 150,Down Mould 150 Max. Cutting Area (mm2) 600x400 680x500 750x610 Cutting Force （ton） 40 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6 Max. Power of Whole Machine (kw) 150 Max. Machine Dimension(L*W*H) (mm) 11150×2300×2700 Weight of Whole Machine ( T ) ≈11 Brand of Main Components PLC Taiwan Delta Touch Screen Monitor (10 inch) Taiwan Delta Feeding Servo Motor (3kw) Taiwan Delta Forming Down Mould Servo Motor (3kw) Taiwan Delta Forming Upper Mould Servo Motor (3kw) Taiwan Delta Cutting Down Mould Servo Motor (3Kw) Taiwan Delta Cutting Upper Mould Servo Motor (5.5Kw) Taiwan Delta Stacking Servo Motor(1.5Kw) Taiwan Delta Heater (192 pcs) TRIMBLE AC Contactor French Schneider Thermo Relay Schneider Intermediate Relay Japan Omron Air Switch South Korea LS Pneumatic Component MAC. AirTAC/ ZHICHENG Cylinder China ZHICHENG   20 years experience GTMSMART Machinery Co., Ltd. is an innovative technology enterprise integrating technology, industry and trade. It mainly develops and produces various types of high-precision automatic production equipment. The newly developed GTM series of fully automatic air pressing molding production line includes: feeding unit, pre-heating unit, forming unit, vertical blanking unit, stack unit, scrap winding unit, punching cutting and stacking three-in-one horizontal blanking unit, online labeling unit, etc., which can be combined with flexible production line according to different production requirements of customers.

PLC Automatic PVC Plastic Vacuum Forming Machine HEY05 Thermoplastic Vacuum Forming Machine Description Vacuum forming, also known as thermoforming, vacuum pressure forming or vacuum molding, is a procedure in which a sheet of heated plastic material is shaped a certain way. PLC Automatic Plastic vacuum Forming Machine: Mainly for the production of variety plastic containers ( egg tray, fruit container, package containers, etc) with thermoplastic sheets, such as APET, PETG, PS, PVC,etc. Product Advantages This Vacuum Forming Machine Utilizes PLC control system, servo drives upper and lower mould plates, and servo feeding, which would be more stable and precision. Human-computer interface with high definition contact-screen, which can monitor the operation situation of all parameter setting. The Plastic vacuum forming machine Applied self-diagnosis function, which can real-time display breakdown information, easy to operate and maintenance. The pvc vacuum forming machine can store several product parameters, and the debugging is quick when producing different products. Automatic Vacuum Forming Machine Specifications Model HEY05A HEY05B Control Air Cylinder Servo Forming Area（L*W） 1350*760 mm Option Customized Forming Area（L*W） 1220*760/900mm, 1350*900mm, 1500*760/900mm Whole Machine Power Max. 50kw Heating Power Max. 40kw Average Power Consumption About 25kw Heating Method Infrared-radiation Heating Work Frequency 4-24 times/min Forming Height Max. 240mm (Male Mould), Max. 200(Female Mould) Sheet Thickness 0.1-2.5 mm Sheet Width 450-800mm Air Compressor 0.6-0.7 Mpa Air Supply Quantity 1.5-2 m3/min Vacuum Flow Rate 100 m3/hour Power 3kw Ultimate Vacuum 5mbar Water Supply 350kg/h Power Supply   Three Phase Four Lines 380V 50/60HZ Machine Dimensions 8900*1800*2600mm Whole Machine Weight Around 4500 kg

PLC Pressure Thermoforming Machine With Three Stations HEY01 Product Introduction This Pressure Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature Mechanical, pneumatic and electrical combination, all working actions are controlled by PLC. Touch screen makes the operation convenient and easy. Pressure And/Or Vacuum forming. Thermoforming Machine: Upper and down mould forming. Servo motor feeding, feeding length can be step-less adjusted. High speed and accurate. Upper & lower heater, four sections heating. Heater with intellectual temperature control system,which has high precision, uniform temperature, won’t be effected by outer voltage.Low power consumption (energy saving 15%), ensure the longer service life of heating furnace. Forming and cutting unit mold open and close controlled by servo motor, products automatically count. Products be stacked downward. Plastic Thermoforming Machine: data memorization function. Feeding width can be synchronously or independently adjusted in electrical way. Heater will automatically push-out when the sheet is over. Auto roll sheet loading, reduce the working load. Plastic Thermoforming Machine Key Specification Model HEY01-6040 HEY01-6850 HEY01-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 3 Stations Forming, Cutting, Stacking Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Cutting Mould Stroke(mm) Upper Mould 150,Down Mould 150 Max. Cutting Area (mm2) 600x400 680x500 750x610 Cutting Force （ton） 40 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6 Max. Power of Whole Machine (kw) 150 Max. Machine Dimension(L*W*H) (mm) 11150×2300×2700 Weight of Whole Machine ( T ) ≈11 Brand of Main Components PLC Taiwan Delta Touch Screen Monitor (10 inch) Taiwan Delta Feeding Servo Motor (3kw) Taiwan Delta Forming Down Mould Servo Motor (3kw) Taiwan Delta Forming Upper Mould Servo Motor (3kw) Taiwan Delta Cutting Down Mould Servo Motor (3Kw) Taiwan Delta Cutting Upper Mould Servo Motor (5.5Kw) Taiwan Delta Stacking Servo Motor(1.5Kw) Taiwan Delta Heater (192 pcs) TRIMBLE AC Contactor French Schneider Thermo Relay Schneider Intermediate Relay Japan Omron Air Switch South Korea LS Pneumatic Component MAC. AirTAC/ ZHICHENG Cylinder China ZHICHENG   20 years experience GTMSMART Machinery Co., Ltd. is an innovative technology enterprise integrating technology, industry and trade. It mainly develops and produces various types of high-precision automatic production equipment. The newly developed GTM series of fully automatic air pressing molding production line includes: feeding unit, pre-heating unit, forming unit, vertical blanking unit, stack unit, scrap winding unit, punching cutting and stacking three-in-one horizontal blanking unit, online labeling unit, etc., which can be combined with flexible production line according to different production requirements of customers.

PLC Pressure Thermoforming Machine With Three Stations HEY01 Product Introduction This Pressure Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature Mechanical, pneumatic and electrical combination, all working actions are controlled by PLC. Touch screen makes the operation convenient and easy. Pressure And/Or Vacuum forming. Thermoforming Machine: Upper and down mould forming. Servo motor feeding, feeding length can be step-less adjusted. High speed and accurate. Upper & lower heater, four sections heating. Heater with intellectual temperature control system,which has high precision, uniform temperature, won’t be effected by outer voltage.Low power consumption (energy saving 15%), ensure the longer service life of heating furnace. Forming and cutting unit mold open and close controlled by servo motor, products automatically count. Products be stacked downward. Plastic Thermoforming Machine: data memorization function. Feeding width can be synchronously or independently adjusted in electrical way. Heater will automatically push-out when the sheet is over. Auto roll sheet loading, reduce the working load. Plastic Thermoforming Machine Key Specification Model HEY01-6040 HEY01-6850 HEY01-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 3 Stations Forming, Cutting, Stacking Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Cutting Mould Stroke(mm) Upper Mould 150,Down Mould 150 Max. Cutting Area (mm2) 600x400 680x500 750x610 Cutting Force （ton） 40 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6 Max. Power of Whole Machine (kw) 150 Max. Machine Dimension(L*W*H) (mm) 11150×2300×2700 Weight of Whole Machine ( T ) ≈11 Brand of Main Components PLC Taiwan Delta Touch Screen Monitor (10 inch) Taiwan Delta Feeding Servo Motor (3kw) Taiwan Delta Forming Down Mould Servo Motor (3kw) Taiwan Delta Forming Upper Mould Servo Motor (3kw) Taiwan Delta Cutting Down Mould Servo Motor (3Kw) Taiwan Delta Cutting Upper Mould Servo Motor (5.5Kw) Taiwan Delta Stacking Servo Motor(1.5Kw) Taiwan Delta Heater (192 pcs) TRIMBLE AC Contactor French Schneider Thermo Relay Schneider Intermediate Relay Japan Omron Air Switch South Korea LS Pneumatic Component MAC. AirTAC/ ZHICHENG Cylinder China ZHICHENG   20 years experience GTMSMART Machinery Co., Ltd. is an innovative technology enterprise integrating technology, industry and trade. It mainly develops and produces various types of high-precision automatic production equipment. The newly developed GTM series of fully automatic air pressing molding production line includes: feeding unit, pre-heating unit, forming unit, vertical blanking unit, stack unit, scrap winding unit, punching cutting and stacking three-in-one horizontal blanking unit, online labeling unit, etc., which can be combined with flexible production line according to different production requirements of customers.

Biodegradable PLA Disposable Plastic Cup Making Machine Application Biodegradable cup making machine mainly for the production of variety plastic containers ( jelly cups, drink cups, package containers, etc) with thermoplastic sheets, such as PP, PET, PE, PS, HIPS, PLA,etc. Supply Sheet Rack Feeding Reducer with Motor Worm Gear Reducer (Supror) Pneumatic Pressure AirTAC Cylinder SC63×25=2个 Pneumatic Feeding Sheet AirTAC Cylinder SC100×150=2个 Main Technical Parameter  (Model) HEY12-6835 HEY12-7542 HEY12-8556 Forming Area 680*350mm 750*420 mm 850*560 mm Sheet Width <680 mm <750 mm <850 mm Max. Forming Depth <180 mm <220 mm <180 mm Heating Rated Power  130kw 140kw 150kw Dimension 5200*2000*2800mm 5400*2000*2800mm 5500*2000*2800mm Machine Total Weight  7T 8T 9T Applicable Raw Material PP, PS, PET, HIPS, PE, PLA(biodegradable) Sheet Thickness 0.2-3.0 mm Work Frequency <35 Motor Power  15kw Power Supply   Three Phase 380V/50HZ Pressure Supply  0.6-0.8 Mpa Max.air Consumption  3.8 Water Consumption  20M3/h Control System PLC Delta Electric Control Human-computer Interface Delta PLC Delta Servo Stretching Motor Delta 11KW servo driver+servo motor Servo Folding Motor Delta 15KW servo driver+servo motor   Forming Station 1.Plastic PLA biodegradable cup making machine standard square tube frame with 100*100, mould is casted steel and upper mould is fixed by nut. 2.Opening and closing mould driven by eccentric gear connecting rod. Driving power by 15KW (Japan Yaskawa) servo motor, American KALK Reducer,                     main axis use HRB bearings. 3.Biodegradable cup making machine main pneumatic component use SMC(Japan) magnetic. 4.Sheet feeding device with planetary gear reducer motor, 4.4KW Siemens servo controller. 5.Stretching device uses 11KW Siemens servo. 6.Lubrication device is fully automatic. 7.Caterpillars adopt fully enclosed structure, with cooling device and can manually adjust sheet width. 8.Heating system uses China ceramic far-infrared heaters, stainless steel upper and down heating furnace, upper heater with 12 pcs heating pads vertically and 8 pcs heating pads horizontally , down heater with 11 pcs heating pads vertically and 8 pcs heating pads horizontally. (specification of heating pad is 85mm*245mm); Electric furnace push-out system uses 0.55KW worm gear reducer and ball screw, which is more stable and also protect the heater pads. 9.Biodegradable plastic cup making machine air filtration uses triplet, blowing cup can adjust airflow. 10.Folding mould is consist of fixed upper plate、flexible mid plate and 4 pillars with surface hard chrome plating 45#. 11.Eccentric is the construction of connecting rod fold mould, with running range ≤ 240mm. 12.Electric heating furnace could be moved horizontally and vertically freely by guide-rail from Hiwin Taiwan. 13.Plastic cup making machine: Toping cups is controlled by AirTAC (Taiwan) cylinder. Waste Edge Winding Device 1.On-line winding 2. Reducer with 0.75KW motor (1pc)

Product Introduction Four Stations Large PP Plastic Thermoforming Machine is forming, cutting and stacking in one line. It is completely driven by servo motor, stable operation, low noise, high efficiency, suitable for producing plastic trays, containers, boxes, lids, etc. Feature 1.PP Plastic Thermoforming Machine: High degree of automation, production speed. By installing the mold to produce different products, to achieve more purposes of one machine. 2.Integration of mechanical and electrical, PLC control, high precision feeding by frequency conversion motor. 3.PP Thermoforming Machine Imported famous brand electrical components, pneumatic components, stable operation, reliable quality, long using life. 4.The thermoforming machines has compact structure, air pressure, forming, cutting, cooling, blow out finished product feature set in one module, make the product process short, high finished product level, accord with national health standards. Key Specification Model GTM 52 4Station Maximum forming area 625x453mm Minimum forming area 250x200mm Maximum mold size 650x478mm Maximum mold weight 250kg Height over sheet material forming part 120mm Height under sheet material forming part 120mm Dry cycle speed 35 cycles/min Maximum film width 710mm Operating pressure 6 bar

PLC Pressure Thermoforming Machine With Three Stations HEY01 Product Introduction This Pressure Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature Mechanical, pneumatic and electrical combination, all working actions are controlled by PLC. Touch screen makes the operation convenient and easy. Pressure And/Or Vacuum forming. Thermoforming Machine: Upper and down mould forming. Servo motor feeding, feeding length can be step-less adjusted. High speed and accurate. Upper & lower heater, four sections heating. Heater with intellectual temperature control system,which has high precision, uniform temperature, won’t be effected by outer voltage.Low power consumption (energy saving 15%), ensure the longer service life of heating furnace. Forming and cutting unit mold open and close controlled by servo motor, products automatically count. Products be stacked downward. Plastic Thermoforming Machine: data memorization function. Feeding width can be synchronously or independently adjusted in electrical way. Heater will automatically push-out when the sheet is over. Auto roll sheet loading, reduce the working load. Plastic Thermoforming Machine Key Specification Model HEY01-6040 HEY01-6850 HEY01-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 3 Stations Forming, Cutting, Stacking Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Cutting Mould Stroke(mm) Upper Mould 150,Down Mould 150 Max. Cutting Area (mm2) 600x400 680x500 750x610 Cutting Force （ton） 40 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6 Max. Power of Whole Machine (kw) 150 Max. Machine Dimension(L*W*H) (mm) 11150×2300×2700 Weight of Whole Machine ( T ) ≈11 Brand of Main Components PLC Taiwan Delta Touch Screen Monitor (10 inch) Taiwan Delta Feeding Servo Motor (3kw) Taiwan Delta Forming Down Mould Servo Motor (3kw) Taiwan Delta Forming Upper Mould Servo Motor (3kw) Taiwan Delta Cutting Down Mould Servo Motor (3Kw) Taiwan Delta Cutting Upper Mould Servo Motor (5.5Kw) Taiwan Delta Stacking Servo Motor(1.5Kw) Taiwan Delta Heater (192 pcs) TRIMBLE AC Contactor French Schneider Thermo Relay Schneider Intermediate Relay Japan Omron Air Switch South Korea LS Pneumatic Component MAC. AirTAC/ ZHICHENG Cylinder China ZHICHENG   20 years experience GTMSMART Machinery Co., Ltd. is an innovative technology enterprise integrating technology, industry and trade. It mainly develops and produces various types of high-precision automatic production equipment. The newly developed GTM series of fully automatic air pressing molding production line includes: feeding unit, pre-heating unit, forming unit, vertical blanking unit, stack unit, scrap winding unit, punching cutting and stacking three-in-one horizontal blanking unit, online labeling unit, etc., which can be combined with flexible production line according to different production requirements of customers.

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and administration the advanced" for Competitive Price for China PLA Biodegradable Plastic Cup Making Machine, As a key enterprise of this industry, our corporation makes endeavours to become a leading supplier, dependant on the faith of expert quality & all over the world provider. Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and administration the advanced" for Biodegradable Cup Making Machine, Biodegradable Plastic Cup Making Machine, Cup Making Machine, We rely on high-quality materials, perfect design, excellent customer service and the competitive price to win the trust of many customers at home and abroad. 95%products are exported to overseas markets. Biodegradable PLA Disposable Plastic Cup Making Machine Application Biodegradable cup making machine mainly for the production of variety plastic containers ( jelly cups, drink cups, package containers, etc) with thermoplastic sheets, such as PP, PET, PE, PS, HIPS, PLA,etc. Supply Sheet Rack Feeding Reducer with Motor Worm Gear Reducer (Supror) Pneumatic Pressure AirTAC Cylinder SC63×25=2个 Pneumatic Feeding Sheet AirTAC Cylinder SC100×150=2个 Main Technical Parameter  (Model) HEY12-6835 HEY12-7542 HEY12-8556 Forming Area 680*350mm 750*420 mm 850*560 mm Sheet Width <680 mm <750 mm <850 mm Max. Forming Depth <180 mm <220 mm <180 mm Heating Rated Power  130kw 140kw 150kw Dimension 5200*2000*2800mm 5400*2000*2800mm 5500*2000*2800mm Machine Total Weight  7T 8T 9T Applicable Raw Material PP, PS, PET, HIPS, PE, PLA(biodegradable) Sheet Thickness 0.2-3.0 mm Work Frequency <35 Motor Power  15kw Power Supply   Three Phase 380V/50HZ Pressure Supply  0.6-0.8 Mpa Max.air Consumption  3.8 Water Consumption  20M3/h Control System PLC Delta Electric Control Human-computer Interface Delta PLC Delta Servo Stretching Motor Delta 11KW servo driver+servo motor Servo Folding Motor Delta 15KW servo driver+servo motor   Forming Station 1.Plastic PLA biodegradable cup making machine standard square tube frame with 100*100, mould is casted steel and upper mould is fixed by nut. 2.Opening and closing mould driven by eccentric gear connecting rod. Driving power by 15KW (Japan Yaskawa) servo motor, American KALK Reducer,                     main axis use HRB bearings. 3.Biodegradable cup making machine main pneumatic component use SMC(Japan) magnetic. 4.Sheet feeding device with planetary gear reducer motor, 4.4KW Siemens servo controller. 5.Stretching device uses 11KW Siemens servo. 6.Lubrication device is fully automatic. 7.Caterpillars adopt fully enclosed structure, with cooling device and can manually adjust sheet width. 8.Heating system uses China ceramic far-infrared heaters, stainless steel upper and down heating furnace, upper heater with 12 pcs heating pads vertically and 8 pcs heating pads horizontally , down heater with 11 pcs heating pads vertically and 8 pcs heating pads horizontally. (specification of heating pad is 85mm*245mm); Electric furnace push-out system uses 0.55KW worm gear reducer and ball screw, which is more stable and also protect the heater pads. 9.Biodegradable plastic cup making machine air filtration uses triplet, blowing cup can adjust airflow. 10.Folding mould is consist of fixed upper plate、flexible mid plate and 4 pillars with surface hard chrome plating 45#. 11.Eccentric is the construction of connecting rod fold mould, with running range ≤ 240mm. 12.Electric heating furnace could be moved horizontally and vertically freely by guide-rail from Hiwin Taiwan. 13.Plastic cup making machine: Toping cups is controlled by AirTAC (Taiwan) cylinder. Waste Edge Winding Device 1.On-line winding 2. Reducer with 0.75KW motor (1pc) Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and administration the advanced" for Competitive Price for Competitive Price for China PLA Biodegradable Plastic Cup Making Machine, As a key enterprise of this industry, our corporation makes endeavours to become a leading supplier, dependant on the faith of expert quality & all over the world provider. biodegradable cup making machine, biodegradable plastic cup making machine, cup making machine, We rely on high-quality materials, perfect design, excellent customer service and the competitive price to win the trust of many customers at home and abroad.

PLC Pressure Thermoforming Machine With Three Stations HEY01 Product Introduction This Pressure Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature Mechanical, pneumatic and electrical combination, all working actions are controlled by PLC. Touch screen makes the operation convenient and easy. Pressure And/Or Vacuum forming. Thermoforming Machine: Upper and down mould forming. Servo motor feeding, feeding length can be step-less adjusted. High speed and accurate. Upper & lower heater, four sections heating. Heater with intellectual temperature control system,which has high precision, uniform temperature, won’t be effected by outer voltage.Low power consumption (energy saving 15%), ensure the longer service life of heating furnace. Forming and cutting unit mold open and close controlled by servo motor, products automatically count. Products be stacked downward. Plastic Thermoforming Machine: data memorization function. Feeding width can be synchronously or independently adjusted in electrical way. Heater will automatically push-out when the sheet is over. Auto roll sheet loading, reduce the working load. Plastic Thermoforming Machine Key Specification Model HEY01-6040 HEY01-6850 HEY01-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 3 Stations Forming, Cutting, Stacking Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Cutting Mould Stroke(mm) Upper Mould 150,Down Mould 150 Max. Cutting Area (mm2) 600x400 680x500 750x610 Cutting Force （ton） 40 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6 Max. Power of Whole Machine (kw) 150 Max. Machine Dimension(L*W*H) (mm) 11150×2300×2700 Weight of Whole Machine ( T ) ≈11 Brand of Main Components PLC Taiwan Delta Touch Screen Monitor (10 inch) Taiwan Delta Feeding Servo Motor (3kw) Taiwan Delta Forming Down Mould Servo Motor (3kw) Taiwan Delta Forming Upper Mould Servo Motor (3kw) Taiwan Delta Cutting Down Mould Servo Motor (3Kw) Taiwan Delta Cutting Upper Mould Servo Motor (5.5Kw) Taiwan Delta Stacking Servo Motor(1.5Kw) Taiwan Delta Heater (192 pcs) TRIMBLE AC Contactor French Schneider Thermo Relay Schneider Intermediate Relay Japan Omron Air Switch South Korea LS Pneumatic Component MAC. AirTAC/ ZHICHENG Cylinder China ZHICHENG   20 years experience GTMSMART Machinery Co., Ltd. is an innovative technology enterprise integrating technology, industry and trade. It mainly develops and produces various types of high-precision automatic production equipment. The newly developed GTM series of fully automatic air pressing molding production line includes: feeding unit, pre-heating unit, forming unit, vertical blanking unit, stack unit, scrap winding unit, punching cutting and stacking three-in-one horizontal blanking unit, online labeling unit, etc., which can be combined with flexible production line according to different production requirements of customers.

PLC Pressure Thermoforming Machine With Three Stations HEY01 Product Introduction This Pressure Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature Mechanical, pneumatic and electrical combination, all working actions are controlled by PLC. Touch screen makes the operation convenient and easy. Pressure And/Or Vacuum forming. Thermoforming Machine: Upper and down mould forming. Servo motor feeding, feeding length can be step-less adjusted. High speed and accurate. Upper & lower heater, four sections heating. Heater with intellectual temperature control system,which has high precision, uniform temperature, won’t be effected by outer voltage.Low power consumption (energy saving 15%), ensure the longer service life of heating furnace. Forming and cutting unit mold open and close controlled by servo motor, products automatically count. Products be stacked downward. Plastic Thermoforming Machine: data memorization function. Feeding width can be synchronously or independently adjusted in electrical way. Heater will automatically push-out when the sheet is over. Auto roll sheet loading, reduce the working load. Plastic Thermoforming Machine Key Specification Model HEY01-6040 HEY01-6850 HEY01-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 3 Stations Forming, Cutting, Stacking Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Cutting Mould Stroke(mm) Upper Mould 150,Down Mould 150 Max. Cutting Area (mm2) 600x400 680x500 750x610 Cutting Force （ton） 40 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6 Max. Power of Whole Machine (kw) 150 Max. Machine Dimension(L*W*H) (mm) 11150×2300×2700 Weight of Whole Machine ( T ) ≈11 Brand of Main Components PLC Taiwan Delta Touch Screen Monitor (10 inch) Taiwan Delta Feeding Servo Motor (3kw) Taiwan Delta Forming Down Mould Servo Motor (3kw) Taiwan Delta Forming Upper Mould Servo Motor (3kw) Taiwan Delta Cutting Down Mould Servo Motor (3Kw) Taiwan Delta Cutting Upper Mould Servo Motor (5.5Kw) Taiwan Delta Stacking Servo Motor(1.5Kw) Taiwan Delta Heater (192 pcs) TRIMBLE AC Contactor French Schneider Thermo Relay Schneider Intermediate Relay Japan Omron Air Switch South Korea LS Pneumatic Component MAC. AirTAC/ ZHICHENG Cylinder China ZHICHENG   20 years experience GTMSMART Machinery Co., Ltd. is an innovative technology enterprise integrating technology, industry and trade. It mainly develops and produces various types of high-precision automatic production equipment. The newly developed GTM series of fully automatic air pressing molding production line includes: feeding unit, pre-heating unit, forming unit, vertical blanking unit, stack unit, scrap winding unit, punching cutting and stacking three-in-one horizontal blanking unit, online labeling unit, etc., which can be combined with flexible production line according to different production requirements of customers.

Product Introduction Single Station Automatic Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature ● More efficient energy use and material utilization. ● The heating station uses high-efficiency ceramic heating elements. ● The upper and lower tables of the forming station are equipped with independent servo drives. ● Single Station Automatic Thermoforming machine has a pre-blowing function to make the product molding more in place. Key Specification Model HEY03-6040 HEY03-6850 HEY03-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6