Featured

Application Biodegradable cup making machine mainly for the production of variety plastic containers ( jelly cups, drink cups, package containers, etc) with thermoplastic sheets, such as PP, PET, PE, PS, HIPS, PLA,etc. Supply Sheet Rack Feeding Reducer with Motor Worm Gear Reducer (Supror) Pneumatic Pressure AirTAC Cylinder SC63×25=2个 Pneumatic Feeding Sheet AirTAC Cylinder SC100×150=2个 Main Technical Parameter  (Model) HEY12-6835 HEY12-7542 HEY12-8556 Forming Area 680*350mm 750*420 mm 850*560 mm Sheet Width <680 mm <750 mm <850 mm Max. Forming Depth <180 mm <220 mm <180 mm Heating Rated Power  130kw 140kw 150kw Dimension 5200*2000*2800mm 5400*2000*2800mm 5500*2000*2800mm Machine Total Weight  7T 8T 9T Applicable Raw Material PP, PS, PET, HIPS, PE, PLA(biodegradable) Sheet Thickness 0.2-3.0 mm Work Frequency <35 Motor Power  15kw Power Supply   Single Phase 220V or Three Phase 380V/50HZ Pressure Supply  0.6-0.8 Mpa Max.air Consumption  3.8 Water Consumption  20M3/h Control System Siemens Electric Control Human-computer Interface Siemens PLC Siemens Servo Stretching Motor Siemens 11KW servo driver+servo motor Servo Folding Motor Siemens 15KW servo driver+servo motor Main Reducer America FALK Feeding Sheet Motor Siemens 4.4KW servo driver+servo motor Temperature Controller Japan Fuji Forming Station 1.Plastic PLA biodegradable cup making machine standard square tube frame with 100*100, mould is casted steel and upper mould is fixed by nut. 2.Opening and closing mould driven by eccentric gear connecting rod. Driving power by 15KW (Japan Yaskawa) servo motor, American KALK Reducer,                     main axis use HRB bearings. 3.Biodegradable cup making machine main pneumatic component use SMC(Japan) magnetic. 4.Sheet feeding device with planetary gear reducer motor, 4.4KW Siemens servo controller. 5.Stretching device uses 11KW Siemens servo. 6.Lubrication device is fully automatic. 7.Caterpillars adopt fully enclosed structure, with cooling device and can manually adjust sheet width. 8.Heating system uses China ceramic far-infrared heaters, stainless steel upper and down heating furnace, upper heater with 12 pcs heating pads vertically and 8 pcs heating pads horizontally , down heater with 11 pcs heating pads vertically and 8 pcs heating pads horizontally. (specification of heating pad is 85mm*245mm); Electric furnace push-out system uses 0.55KW worm gear reducer and ball screw, which is more stable and also protect the heater pads. 9.Biodegradable plastic cup making machine air filtration uses triplet, blowing cup can adjust airflow. 10.Folding mould is consist of fixed upper plate、flexible mid plate and 4 pillars with surface hard chrome plating 45#. 11.Eccentric is the construction of connecting rod fold mould, with running range ≤ 240mm. 12.Electric heating furnace could be moved horizontally and vertically freely by guide-rail from Hiwin Taiwan. 13.Plastic cup making machine: Toping cups is controlled by AirTAC (Taiwan) cylinder. Waste Edge Winding Device 1.On-line winding 2. Reducer with 0.75KW motor (1pc)

We believe that long time period partnership is a result of top of the range, value added services, rich expertise and personal contact for Best Price on China Fully Automatic Plastic Cup Thermoforming Machine Disposable Glass Making Machine /Disposable Cup Making Machine/Plastic Cup Forming Machine, We put genuine and health as the primary responsibility. Now we have a professional international trade crew which graduated from America. We've been your next enterprise partner. We believe that long time period partnership is a result of top of the range, value added services, rich expertise and personal contact for Fully-Automatic Plastic Cup Thermoforming Machine, Plastic Cup Forming Machine, Plastic Disposable Cup Glass Making Machine, We insist on "Quality First, Reputation First and Customer First". We are committed to providing high-quality items and good after-sales services. Up to now, our solutions have been exported to more than 60 countries and areas around the world, such as America, Australia and Europe. We enjoy a high reputation at home and abroad. Always persisting in the principle of "Credit, Customer and Quality", we expect cooperation with people in all walks of life for mutual benefits. Cup Thermoforming Machine Application The whole Plastic Cup Thermoforming Machine Mainly for the production of variety plastic containers ( jelly cups, drink cups, disposable cup, package containers, food bowl etc) with thermoplastic sheets, such as PP, PET, PS, PLA,etc. Cup Making Machine Feature Utilize hydraulic system and electrical technology control for servo stretching. It’s a high price ratio machine which was developed base on customer’s market demand.  The whole plastic cup making machine is controlled by hydraulic and servo, with inverter feeding, hydraulic driven system, servo stretching, these make it has stable operation and finish product with high quality. Thermoforming Cup Making Machine Technical Specifications  (Model) HEY11-6835 HEY11-7542 HEY11-8556 Forming Area 680x350mm  750x420 mm 850x560 mm Sheet width 600-710mm 680-750 mm 780-850 mm Max.forming depth 180mm 180 mm 180 mm Heating rated power  100KW 140KW 150KW Machine total weight  5T 7T 7T Motor power 10KW 15KW 15KW Dimension 4700x1600x3100mm Applicable raw material PP, PS, PET, HIPS, PE, PLA Sheet thickness 0.3-2.0mm Work frequency <35 times/minute Drive mode Hydraulic and pneumatic pressure Pressure supply  0.6-0.8 Air consumption 2200L/min Water consumption ≦0.5m3 Power supply   Three Phase 380V/50HZ We believe that long time period partnership is a result of top of the range, value added services, rich expertise and personal contact for Best Price on China Fully Automatic Plastic Cup Thermoforming Machine Disposable Glass Making Machine /Disposable Cup Making Machine/Plastic Cup Forming Machine, We put genuine and health as the primary responsibility. We've been your next enterprise partner. Fully Automatic Plastic Cup Thermoforming Machine, Plastic Cup Forming Machine, Plastic Disposable Cup Glass Making Machine, We insist on "Quality First, Reputation First and Customer First". We are committed to providing high-quality items and good after-sales services. Up to now, our solutions have been exported to more than 60 countries and areas around the world, such as America, Australia and Europe. We enjoy a high reputation at home and abroad. Always persisting in the principle of "Credit, Customer and Quality", we expect cooperation with people in all walks of life for mutual benefits.

Product Introduction Four Stations Large PP Plastic Thermoforming Machine is forming, cutting and stacking in one line. It is completely driven by servo motor, stable operation, low noise, high efficiency, suitable for producing plastic trays, containers, boxes, lids, etc. Feature 1.PP Plastic Thermoforming Machine: High degree of automation, production speed. By installing the mold to produce different products, to achieve more purposes of one machine. 2.Integration of mechanical and electrical, PLC control, high precision feeding by frequency conversion motor. 3.PP Thermoforming Machine Imported famous brand electrical components, pneumatic components, stable operation, reliable quality, long using life. 4.The thermoforming machines has compact structure, air pressure, forming, cutting, cooling, blow out finished product feature set in one module, make the product process short, high finished product level, accord with national health standards. Key Specification Model GTM 52 4Station Maximum forming area 625x453mm Minimum forming area 250x200mm Maximum mold size 650x478mm Maximum mold weight 250kg Height over sheet material forming part 120mm Height under sheet material forming part 120mm Dry cycle speed 35 cycles/min Maximum film width 710mm Operating pressure 6 bar

cup making machine Application The cup making machine is Mainly for the production of variety plastic containers ( jelly cups, drink cups, package containers, etc) with thermoplastic sheets, such as PP, PET, PE, PS, HIPS, PLA,etc. Cup Making Machine Technical Specifications Model HEY12-6835 HEY12-7542 HEY12-8556 Forming Area 680*350mm 750*420 mm 850*560 mm Sheet Width <680 mm <750 mm <850 mm Max. Forming Depth <180 mm <220 mm <180 mm Heating Rated Power  130kw 140kw 150kw Dimension 5200*2000*2800mm 5400*2000*2800mm 5500*2000*2800mm Machine Total Weight  7T 8T 9T Applicable Raw Material PP, PS, PET, HIPS, PE, PLA Sheet Thickness 0.2-3.0 mm Work Frequency <35 Motor Power  15kw Power Supply   Three Phase 380V/50HZ Pressure Supply  0.6-0.8 Mpa Max.air Consumption  3.8 Water Consumption  20M3/h Control System PLC Delta Supply Sheet Rack Feeding Reducer with Motor Worm Gear Reducer (Supror) Pneumatic Pressure AirTAC Cylinder SC63×25=2PSC Pneumatic Feeding Sheet AirTAC Cylinder SC100×150=2PSC Electric Control Human-computer Interface Delta PLC Delta Servo Stretching Motor Delta 11KW servo driver+servo motor Servo Folding Motor Delta 15KW servo driver+servo motor Forming Station Standard square tube frame with 100*100, mould is casted steel and upper mould is fixed by nut. Opening and closing mould driven by eccentric gear connecting rod.Driving power by 15KW (Japan Yaskawa) servo motor, American KALK Reducer,main axis use HRB bearings. Plastic Cup Thermoforming Machine Main pneumatic component use SMC(Japan) magnetic. Sheet feeding device with planetary gear reducer motor, 4.4KW Siemens servo controller. Stretching device uses 11KW Siemens servo. Lubrication device is fully automatic. Caterpillars adopt fully enclosed structure, with cooling device and can manually adjust sheet width. Heating system uses China ceramic far-infrared heaters, stainless steel upper and down heating furnace, upper heater with 12 pcs heating pads vertically and 8 pcs heating pads horizontally , down heater with 11 pcs heating pads vertically and 8 pcs heating pads horizontally.(specification of heating pad is 85mm*245mm);Electric furnace push-out system uses 0.55KW worm gear reducer and ball screw, which is more stable and also protect the heater pads. Cup Thermoforming Machine Air filtration uses triplet, blowing cup can adjust airflow. Folding mould is consist of fixed upper plate、flexible mid plate and 4 pillars with surface hard chrome plating 45#. Eccentric is the construction of connecting rod fold mould, with running range ≤ 240mm. Electric heating furnace could be moved horizontally and vertically freely by guide-rail from Hiwin Taiwan. Top cups is controlled by AirTAC (Taiwan) cylinder. Waste Edge Winding Device On-line winding Reducer with 0.75KW motor (1 pc)

Application Automatic Vacuum Forming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, package containers, etc) with thermoplastic sheets. Vacuum Forming Machine Features 1.Mechanical, pneumatic, electrical integration. Each action program is controlled by PLC. Touching screen operation is simple and convenient. 2.Vacuum Forming In-mould Cutting. 3.Up and down moulds forming type. 4.Servo feeding, length step less adjusting, high speed accurately and stablity. 5.Blister Vacuum Forming Machine Up and down heater with two phases heating. 6.Electric heating furnace temperature control system adopts full computer intelligent automatic compensation control, partition control using digital input interface one by one, has the high precision fine-tuning, uniform temperature, heating up fast (only 3 minutes from 0-400 degrees), stability (not influenced by external voltage, temperature fluctuations no more than 1 degree), low energy consumption (energy saving about 15%), the furnace plate advantages for long life. 7.Forming and cutting station with open and close servo motor control, products with automatic tally output. 8.Products can be choosing by you to down stacking type,Or the manipulator is taken in the mold. 9.Plastic vacuum forming machine with product information and data memory function. 10.Feeding caterpillar width can be synchronization automatic or discretely electric adjusting. 11.Heater automatic shift out device. 12.Mechanical loading device, reduce workers labor strength. Vacuum Forming Machine Technical Parameter Forming Area 850x780mm Max.Forming Depth 150mm Sheet thickness 0.2-1.5mm Work Efficiency Max. 30 cycles/ Min Air Pressure 0.9mpa Power Consumption 50-70kw/h Max. Sheet Width 760mm Suited Material PP, PS, PET, PVC Total Max. Power 110 Overall size(LxWxH）mm 10040x2600x3200 Total Weight (T) 7

Flower Pot Making Machine Application This Thermoforming Machine Mainly for the production of variety plastic containers with holes ( flower pots, fruit containers, lids with hole, package containers, etc) with thermoplastic sheets, such as PP, PET, PS,etc. Main Features 55 tons of hydraulic system. Motor power with 15 levels. Hydraulic valve all made by YUKEN Japan. Plastic flower pot making machine mechanical Arm: 1)Horizontal arm and vertical arm use 2KW servo motor; Driven with double shaft synchronous belt.  2)Slide of Taiwan brand;  3)Aluminum material; The frame adopts 160*80, 100*100 square pipe welding. Cast iron working table, constant type and strong impact shear force. Four columns using 45# forgings heat treatment chrome plating of diameter 75mm. Flower pot making machine delivered by chain using 3KW Vtron and RV110 reducer. The method of mold: using four guide column to control the accuracy of both sides. The diameter is 100mm; Material used is 45# chromeplate. Machine Parameter Machine Station Forming, cutting Mechanical Arm Punching and stacking Max Formed Area 1200*1000 (mm2) Max Formed Depth 280-340mm (adjustable) Sheet Width 800-1200mm Roll Diameter 800mm Sheet Thickness 0.2-2.0mm Cycle Per Minute 8-12 molds/min Air Pressure 0.6-0.8wpa（3m³/min） Suitable Material PP/PVC/PS/PET/HIPS Power Consumption 48KW/Hr Engine Power ≤210KW Cutting Mode automatic cutting inside mold Stretching Mode Servo ( 11KW VAXtron servo motor) Ball crew TBI Taiwan Total Weight 6000kg Rack Square steel(100*100) Dimensions L5500*W1800*H2800 Power Supply 380v/50Hz 3 phase 4 lines GB copper wire 90 ㎡

Flower Pot Making Machine Application This Thermoforming Machine Mainly for the production of variety plastic containers with holes ( flower pots, fruit containers, lids with hole, package containers, etc) with thermoplastic sheets, such as PP, PET, PS,etc. Main Features 55 tons of hydraulic system. Motor power with 15 levels. Hydraulic valve all made by YUKEN Japan. Plastic flower pot making machine mechanical Arm: 1)Horizontal arm and vertical arm use 2KW servo motor; Driven with double shaft synchronous belt.  2)Slide of Taiwan brand;  3)Aluminum material; The frame adopts 160*80, 100*100 square pipe welding. Cast iron working table, constant type and strong impact shear force. Four columns using 45# forgings heat treatment chrome plating of diameter 75mm. Flower pot making machine delivered by chain using 3KW Vtron and RV110 reducer. The method of mold: using four guide column to control the accuracy of both sides. The diameter is 100mm; Material used is 45# chromeplate. Machine Parameter Machine Station Forming, cutting Mechanical Arm Punching and stacking Max Formed Area 1200*1000 (mm2) Max Formed Depth 280-340mm (adjustable) Sheet Width 800-1200mm Roll Diameter 800mm Sheet Thickness 0.2-2.0mm Cycle Per Minute 8-12 molds/min Air Pressure 0.6-0.8wpa（3m³/min） Suitable Material PP/PVC/PS/PET/HIPS Power Consumption 48KW/Hr Engine Power ≤210KW Cutting Mode automatic cutting inside mold Stretching Mode Servo ( 11KW VAXtron servo motor) Ball crew TBI Taiwan Total Weight 6000kg Rack Square steel(100*100) Dimensions L5500*W1800*H2800 Power Supply 380v/50Hz 3 phase 4 lines GB copper wire 90 ㎡

Application Paper Bowl Making Machine is a multi-station automatic forming machine which adopts automatic paper feeding, sealing, oil filling, bottoming, heating, knurling and crimping. Such continuous processes as well as photoelectric detection, fault alarm, counting and other functions are ideal equipment for producing large-capacity calibers or food containers such as paper soup bowls, instant noodle bowls, convenient noodle bowl, breakfast bowl, and other paper food container bowls.

Product Introduction This Pressure Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature Mechanical, pneumatic and electrical combination, all working actions are controlled by PLC. Touch screen makes the operation convenient and easy. Pressure And/Or Vacuum forming. Thermoforming Machine: Upper and down mould forming. Servo motor feeding, feeding length can be step-less adjusted. High speed and accurate. Upper & lower heater, four sections heating. Heater with intellectual temperature control system,which has high precision, uniform temperature, won’t be effected by outer voltage.Low power consumption (energy saving 15%), ensure the longer service life of heating furnace. Forming and cutting unit mold open and close controlled by servo motor, products automatically count. Products be stacked downward. Plastic Thermoforming Machine: data memorization function. Feeding width can be synchronously or independently adjusted in electrical way. Heater will automatically push-out when the sheet is over. Auto roll sheet loading, reduce the working load. Plastic Thermoforming Machine Key Specification Model HEY01-6040 HEY01-6850 HEY01-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 3 Stations Forming, Cutting, Stacking Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Cutting Mould Stroke(mm) Upper Mould 150,Down Mould 150 Max. Cutting Area (mm2) 600x400 680x500 750x610 Cutting Force （ton） 40 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6 Max. Power of Whole Machine (kw) 150 Max. Machine Dimension(L*W*H) (mm) 11150×2300×2700 Weight of Whole Machine ( T ) ≈11 Brand of Main Components PLC Taiwan Delta Touch Screen Monitor (10 inch) Taiwan Delta Feeding Servo Motor (3kw) Taiwan Delta Forming Down Mould Servo Motor (3kw) Taiwan Delta Forming Upper Mould Servo Motor (3kw) Taiwan Delta Cutting Down Mould Servo Motor (3Kw) Taiwan Delta Cutting Upper Mould Servo Motor (5.5Kw) Taiwan Delta Stacking Servo Motor(1.5Kw) Taiwan Delta Heater (192 pcs) TRIMBLE AC Contactor French Schneider Thermo Relay Schneider Intermediate Relay Japan Omron Air Switch South Korea LS Pneumatic Component MAC. AirTAC/ ZHICHENG Cylinder China ZHICHENG   20 years experience GTMSMART Machinery Co., Ltd. is an innovative technology enterprise integrating technology, industry and trade. It mainly develops and produces various types of high-precision automatic production equipment. The newly developed GTM series of fully automatic air pressing molding production line includes: feeding unit, pre-heating unit, forming unit, vertical blanking unit, stack unit, scrap winding unit, punching cutting and stacking three-in-one horizontal blanking unit, online labeling unit, etc., which can be combined with flexible production line according to different production requirements of customers.

The pretty loaded projects management experiences and one to a person support model make the high importance of business enterprise communication and our easy understanding of your expectations for Newly Arrival Chinese Cheap Automatic Pressure Forming Machine Thermoforming Machine Factory, We'll offer most effective top quality, quite possibly the most sector aggressive value, for each new and old customers with all the most excellent green services. The pretty loaded projects management experiences and one to a person support model make the high importance of business enterprise communication and our easy understanding of your expectations for Pressure Forming Machine, Thermoforming Machine, Thermoforming Machine Factory, We've got constructed strong and long co-operation relationship with an enormous quantity of companies within this business overseas. Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. In depth Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation. n Portugal for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership. Product Introduction Single Station Automatic Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature ● More efficient energy use and material utilization. ● The heating station uses high-efficiency ceramic heating elements. ● The upper and lower tables of the forming station are equipped with independent servo drives. ● Single Station Automatic Thermoforming machine has a pre-blowing function to make the product molding more in place. Key Specification Model HEY03-6040 HEY03-6850 HEY03-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6 The pretty loaded projects management experiences and one to a person support model make the high importance of business enterprise communication and our easy understanding of your expectations for Newly Arrival Chinese Cheap Automatic Pressure Forming Machine Thermoforming Machine Factory, We'll offer most effective top quality, quite possibly the most sector aggressive value, for each new and old customers with all the most excellent green services. Newly Arrival China Cheap Thermoforming Machine, Thermoforming Machine Factory, Pressure Forming Machine,, We've got constructed strong and long co-operation relationship with an enormous quantity of companies within this business overseas. Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. In depth Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation.Hope to get inquiries type you and construct a long-term co-operation partnership.

Application Automatic Vacuum Forming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, package containers, etc) with thermoplastic sheets. Vacuum Forming Machine Features 1.Mechanical, pneumatic, electrical integration. Each action program is controlled by PLC. Touching screen operation is simple and convenient. 2.Vacuum Forming In-mould Cutting. 3.Up and down moulds forming type. 4.Servo feeding, length step less adjusting, high speed accurately and stablity. 5.Blister Vacuum Forming Machine Up and down heater with two phases heating. 6.Electric heating furnace temperature control system adopts full computer intelligent automatic compensation control, partition control using digital input interface one by one, has the high precision fine-tuning, uniform temperature, heating up fast (only 3 minutes from 0-400 degrees), stability (not influenced by external voltage, temperature fluctuations no more than 1 degree), low energy consumption (energy saving about 15%), the furnace plate advantages for long life. 7.Forming and cutting station with open and close servo motor control, products with automatic tally output. 8.Products can be choosing by you to down stacking type,Or the manipulator is taken in the mold. 9.Plastic vacuum forming machine with product information and data memory function. 10.Feeding caterpillar width can be synchronization automatic or discretely electric adjusting. 11.Heater automatic shift out device. 12.Mechanical loading device, reduce workers labor strength. Vacuum Forming Machine Technical Parameter Forming Area 850x780mm Max.Forming Depth 150mm Sheet thickness 0.2-1.5mm Work Efficiency Max. 30 cycles/ Min Air Pressure 0.9mpa Power Consumption 50-70kw/h Max. Sheet Width 760mm Suited Material PP, PS, PET, PVC Total Max. Power 110 Overall size(LxWxH）mm 10040x2600x3200 Total Weight (T) 7

Cup Thermoforming Machine Application The whole Plastic Cup Thermoforming Machine Mainly for the production of variety plastic containers ( jelly cups, drink cups, disposable cup, package containers, food bowl etc) with thermoplastic sheets, such as PP, PET, PS, PLA,etc. Cup Making Machine Feature Utilize hydraulic system and electrical technology control for servo stretching. It’s a high price ratio machine which was developed base on customer’s market demand.  The whole plastic cup making machine is controlled by hydraulic and servo, with inverter feeding, hydraulic driven system, servo stretching, these make it has stable operation and finish product with high quality. Thermoforming Cup Making Machine Technical Specifications  (Model) HEY11-6835 HEY11-7542 HEY11-8556 Forming Area 680x350mm  750x420 mm 850x560 mm Sheet width 600-710mm 680-750 mm 780-850 mm Max.forming depth 180mm 180 mm 180 mm Heating rated power  100KW 140KW 150KW Machine total weight  5T 7T 7T Motor power 10KW 15KW 15KW Dimension 4700x1600x3100mm Applicable raw material PP, PS, PET, HIPS, PE, PLA Sheet thickness 0.3-2.0mm Work frequency <35 times/minute Drive mode Hydraulic and pneumatic pressure Pressure supply  0.6-0.8 Air consumption 2200L/min Water consumption ≦0.5m3 Power supply   Three Phase 380V/50HZ