Featured

Free plastic sheets or auxiliary equipment to Nov 30. Contact us now Cup Making Machine Introduction Plastic glass cup making machine is suitable for molding PP, PET, PS, PLA and other plastic sheets to produce various packaging products such as boxes, plates, cups, bowls, lids, etc. Such as: milk cups, jelly cups, ice cream cups, drink cups, food bowl, etc. Cup Making Machine Specifications  Model HEY11-6835 HEY11-7542 HEY11-8556 Forming Area 680x350mm 750x420 mm 850x560 mm Sheet width 600-710mm 680-750 mm 780-850 mm Max.forming depth 180mm 180 mm 180 mm Heating rated power 100KW 140KW 150KW Machine total weight 5T 7T 7T Motor power 10KW 15KW 15KW Dimension 4700x1600x3100mm Applicable raw material PP,PS,PET,HIPS,PE,PLA Sheet thickness 0.3-2.0mm Work frequency <35 times/minute Drive mode Hydraulic and pneumatic pressure Pressure supply 0.6-0.8 Air consumption 2200L/min Water consumption ≦0.5m3 Power supply Three Phase 380V/50HZ plastic cup making machine Feature 1.Auto-unwinding rack: Disposable plastic cup making machine designed for overweight material by using pneumatic structure. Double feeding rods are convenient for conveying materials, which not only improves the efficiency but reduces the material waste. 2.Heating: Plastic glass making machine upper and down heating furnace, can move horizontally and vertically to ensure that the temperature of the plastic sheet is uniform during the production process. Sheet feeding is controlled by servo motor and the deviation is less than 0.01mm. The feeding rail is controlled by closed-loop waterway to reduce the material waste and cooling. 3.Mechanical arm: Plastic cup forming machine can automatically match the molding speed. The speed is adjustable according to different products. Different parameters can be set. Such as picking position, unloading position, stacking quantity, stacking height and so on. 4.Waste winding device: Plastic Cup Thermoforming Machine adopts automatic take-up to collect surplus material into a roll for collection. Double cylinder structure makes the operation easy and convenient. The outer cylinder is easy to take down when the surplus material reach a certain diameter, and the inner cylinder is working at the same time. This plastic glass machine operation will not interrupt the production process.

Three Stations Negative Pressure Forming Machine HEY06 Application This Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, package containers, etc) with thermoplastic sheets. Three Stations Negative Pressure Forming Machine Features 1.Mechanical, pneumatic, electrical integration. Each action program is controlled by PLC. Touching screen operation is simple and convenient. 2.Vacuum Forming In-mould Cutting. 3.Up and down moulds forming type. 4.Servo feeding, length step less adjusting, high speed accurately and stablity. 5.Negative Pressure Forming Machine Up and down heater with two phases heating. 6.Electric heating furnace temperature control system adopts full computer intelligent automatic compensation control, partition control using digital input interface one by one, has the high precision fine-tuning, uniform temperature, heating up fast (only 3 minutes from 0-400 degrees), stability (not influenced by external voltage, temperature fluctuations no more than 1 degree), low energy consumption (energy saving about 15%), the furnace plate advantages for long life. 7.Forming and cutting station with open and close servo motor control, products with automatic tally output. 8.Products can be choosing by you to down stacking type,Or the manipulator is taken in the mold. 9.Plastic Thermoforming Machine with product information and data memory function. 10.Feeding caterpillar width can be synchronization automatic or discretely electric adjusting. 11.Heater automatic shift out device. 12.Mechanical loading device, reduce workers labor strength. Negative Pressure Forming Machine Technical Parameter Forming Area 850x780mm Max.Forming Depth 150mm Sheet thickness 0.2-1.5mm Work Efficiency Max. 30 cycles/ Min Air Pressure 0.9mpa Power Consumption 50-70kw/h Max. Sheet Width 760mm Suited Material PP, PS, PET, PVC Total Max. Power 110 Overall size(LxWxH）mm 10040x2600x3200 Total Weight (T) 7

Three Stations Negative Pressure Forming Machine HEY06 Application This Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, package containers, etc) with thermoplastic sheets. Three Stations Negative Pressure Forming Machine Features 1.Mechanical, pneumatic, electrical integration. Each action program is controlled by PLC. Touching screen operation is simple and convenient. 2.Vacuum Forming In-mould Cutting. 3.Up and down moulds forming type. 4.Servo feeding, length step less adjusting, high speed accurately and stablity. 5.Negative Pressure Forming Machine Up and down heater with two phases heating. 6.Electric heating furnace temperature control system adopts full computer intelligent automatic compensation control, partition control using digital input interface one by one, has the high precision fine-tuning, uniform temperature, heating up fast (only 3 minutes from 0-400 degrees), stability (not influenced by external voltage, temperature fluctuations no more than 1 degree), low energy consumption (energy saving about 15%), the furnace plate advantages for long life. 7.Forming and cutting station with open and close servo motor control, products with automatic tally output. 8.Products can be choosing by you to down stacking type,Or the manipulator is taken in the mold. 9.Plastic Thermoforming Machine with product information and data memory function. 10.Feeding caterpillar width can be synchronization automatic or discretely electric adjusting. 11.Heater automatic shift out device. 12.Mechanical loading device, reduce workers labor strength. Negative Pressure Forming Machine Technical Parameter Forming Area 850x780mm Max.Forming Depth 150mm Sheet thickness 0.2-1.5mm Work Efficiency Max. 30 cycles/ Min Air Pressure 0.9mpa Power Consumption 50-70kw/h Max. Sheet Width 760mm Suited Material PP, PS, PET, PVC Total Max. Power 110 Overall size(LxWxH）mm 10040x2600x3200 Total Weight (T) 7

Flower Pot Making Machine Application This Thermoforming Machine Mainly for the production of variety plastic containers with holes ( flower pots, fruit containers, lids with hole, package containers, etc) with thermoplastic sheets, such as PP, PET, PS,etc. Main Features 55 tons of hydraulic system. Motor power with 15 levels. Hydraulic valve all made by YUKEN Japan. Plastic flower pot making machine mechanical Arm: 1)Horizontal arm and vertical arm use 2KW servo motor; Driven with double shaft synchronous belt.  2)Slide of Taiwan brand;  3)Aluminum material; The frame adopts 160*80, 100*100 square pipe welding. Cast iron working table, constant type and strong impact shear force. Four columns using 45# forgings heat treatment chrome plating of diameter 75mm. Flower pot making machine delivered by chain using 3KW Vtron and RV110 reducer. The method of mold: using four guide column to control the accuracy of both sides. The diameter is 100mm; Material used is 45# chromeplate. Machine Parameter Machine Station Forming, cutting Mechanical Arm Punching and stacking Max Formed Area 1200*1000 (mm2) Max Formed Depth 280-340mm (adjustable) Sheet Width 800-1200mm Roll Diameter 800mm Sheet Thickness 0.2-2.0mm Cycle Per Minute 8-12 molds/min Air Pressure 0.6-0.8wpa（3m³/min） Suitable Material PP/PVC/PS/PET/HIPS Power Consumption 48KW/Hr Engine Power ≤210KW Cutting Mode automatic cutting inside mold Stretching Mode Servo ( 11KW VAXtron servo motor) Ball crew TBI Taiwan Total Weight 6000kg Rack Square steel(100*100) Dimensions L5500*W1800*H2800 Power Supply 380v/50Hz 3 phase 4 lines GB copper wire 90 ㎡

Cup Thermoforming Machine Application The whole Plastic Cup Thermoforming Machine Mainly for the production of variety plastic containers ( jelly cups, drink cups, disposable cup, package containers, food bowl etc) with thermoplastic sheets, such as PP, PET, PS, PLA,etc. Cup Making Machine Feature Utilize hydraulic system and electrical technology control for servo stretching. It’s a high price ratio machine which was developed base on customer’s market demand.  The whole plastic cup making machine is controlled by hydraulic and servo, with inverter feeding, hydraulic driven system, servo stretching, these make it has stable operation and finish product with high quality. Thermoforming Cup Making Machine Technical Specifications  (Model) HEY11-6835 HEY11-7542 HEY11-8556 Forming Area 680x350mm 750x420 mm 850x560 mm Sheet width 600-710mm 680-750 mm 780-850 mm Max.forming depth 180mm 180 mm 180 mm Heating rated power 100KW 140KW 150KW Machine total weight 5T 7T 7T Motor power 10KW 15KW 15KW Dimension 4700x1600x3100mm Applicable raw material PP, PS, PET, HIPS, PE, PLA Sheet thickness 0.3-2.0mm Work frequency <35 times/minute Drive mode Hydraulic and pneumatic pressure Pressure supply 0.6-0.8 Air consumption 2200L/min Water consumption ≦0.5m3 Power supply Three Phase 380V/50HZ

Biodegradable PLA Disposable Plastic Cup Making Machine Application Biodegradable cup making machine mainly for the production of variety plastic containers ( jelly cups, drink cups, package containers, etc) with thermoplastic sheets, such as PP, PET, PE, PS, HIPS, PLA,etc. Supply Sheet Rack Feeding Reducer with Motor Worm Gear Reducer (Supror) Pneumatic Pressure AirTAC Cylinder SC63×25=2个 Pneumatic Feeding Sheet AirTAC Cylinder SC100×150=2个 Main Technical Parameter  (Model) HEY12-6835 HEY12-7542 HEY12-8556 Forming Area 680*350mm 750*420 mm 850*560 mm Sheet Width <680 mm <750 mm <850 mm Max. Forming Depth <180 mm <220 mm <180 mm Heating Rated Power  130kw 140kw 150kw Dimension 5200*2000*2800mm 5400*2000*2800mm 5500*2000*2800mm Machine Total Weight  7T 8T 9T Applicable Raw Material PP, PS, PET, HIPS, PE, PLA(biodegradable) Sheet Thickness 0.2-3.0 mm Work Frequency <35 Motor Power  15kw Power Supply   Three Phase 380V/50HZ Pressure Supply  0.6-0.8 Mpa Max.air Consumption  3.8 Water Consumption  20M3/h Control System PLC Delta Electric Control Human-computer Interface Delta PLC Delta Servo Stretching Motor Delta 11KW servo driver+servo motor Servo Folding Motor Delta 15KW servo driver+servo motor   Forming Station 1.Plastic PLA biodegradable cup making machine standard square tube frame with 100*100, mould is casted steel and upper mould is fixed by nut. 2.Opening and closing mould driven by eccentric gear connecting rod. Driving power by 15KW (Japan Yaskawa) servo motor, American KALK Reducer,                     main axis use HRB bearings. 3.Biodegradable cup making machine main pneumatic component use SMC(Japan) magnetic. 4.Sheet feeding device with planetary gear reducer motor, 4.4KW Siemens servo controller. 5.Stretching device uses 11KW Siemens servo. 6.Lubrication device is fully automatic. 7.Caterpillars adopt fully enclosed structure, with cooling device and can manually adjust sheet width. 8.Heating system uses China ceramic far-infrared heaters, stainless steel upper and down heating furnace, upper heater with 12 pcs heating pads vertically and 8 pcs heating pads horizontally , down heater with 11 pcs heating pads vertically and 8 pcs heating pads horizontally. (specification of heating pad is 85mm*245mm); Electric furnace push-out system uses 0.55KW worm gear reducer and ball screw, which is more stable and also protect the heater pads. 9.Biodegradable plastic cup making machine air filtration uses triplet, blowing cup can adjust airflow. 10.Folding mould is consist of fixed upper plate、flexible mid plate and 4 pillars with surface hard chrome plating 45#. 11.Eccentric is the construction of connecting rod fold mould, with running range ≤ 240mm. 12.Electric heating furnace could be moved horizontally and vertically freely by guide-rail from Hiwin Taiwan. 13.Plastic cup making machine: Toping cups is controlled by AirTAC (Taiwan) cylinder. Waste Edge Winding Device 1.On-line winding 2. Reducer with 0.75KW motor (1pc)

Three Stations Negative Pressure Forming Machine HEY06 Application This Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, package containers, etc) with thermoplastic sheets. Three Stations Negative Pressure Forming Machine Features 1.Mechanical, pneumatic, electrical integration. Each action program is controlled by PLC. Touching screen operation is simple and convenient. 2.Vacuum Forming In-mould Cutting. 3.Up and down moulds forming type. 4.Servo feeding, length step less adjusting, high speed accurately and stablity. 5.Negative Pressure Forming Machine Up and down heater with two phases heating. 6.Electric heating furnace temperature control system adopts full computer intelligent automatic compensation control, partition control using digital input interface one by one, has the high precision fine-tuning, uniform temperature, heating up fast (only 3 minutes from 0-400 degrees), stability (not influenced by external voltage, temperature fluctuations no more than 1 degree), low energy consumption (energy saving about 15%), the furnace plate advantages for long life. 7.Forming and cutting station with open and close servo motor control, products with automatic tally output. 8.Products can be choosing by you to down stacking type,Or the manipulator is taken in the mold. 9.Plastic Thermoforming Machine with product information and data memory function. 10.Feeding caterpillar width can be synchronization automatic or discretely electric adjusting. 11.Heater automatic shift out device. 12.Mechanical loading device, reduce workers labor strength. Negative Pressure Forming Machine Technical Parameter Forming Area 850x780mm Max.Forming Depth 150mm Sheet thickness 0.2-1.5mm Work Efficiency Max. 30 cycles/ Min Air Pressure 0.9mpa Power Consumption 50-70kw/h Max. Sheet Width 760mm Suited Material PP, PS, PET, PVC Total Max. Power 110 Overall size(LxWxH）mm 10040x2600x3200 Total Weight (T) 7

Application Punching Hole Machine Mainly for punching hole of variety plastic containers ( lids, fruit containers, package containers, flower pot,etc).

Free plastic sheets or auxiliary equipment to Nov 30. Contact us now Cup Making Machine Introduction Plastic glass cup making machine is suitable for molding PP, PET, PS, PLA and other plastic sheets to produce various packaging products such as boxes, plates, cups, bowls, lids, etc. Such as: milk cups, jelly cups, ice cream cups, drink cups, food bowl, etc. Cup Making Machine Specifications  Model HEY11-6835 HEY11-7542 HEY11-8556 Forming Area 680x350mm 750x420 mm 850x560 mm Sheet width 600-710mm 680-750 mm 780-850 mm Max.forming depth 180mm 180 mm 180 mm Heating rated power 100KW 140KW 150KW Machine total weight 5T 7T 7T Motor power 10KW 15KW 15KW Dimension 4700x1600x3100mm Applicable raw material PP,PS,PET,HIPS,PE,PLA Sheet thickness 0.3-2.0mm Work frequency <35 times/minute Drive mode Hydraulic and pneumatic pressure Pressure supply 0.6-0.8 Air consumption 2200L/min Water consumption ≦0.5m3 Power supply Three Phase 380V/50HZ plastic cup making machine Feature 1.Auto-unwinding rack: Disposable plastic cup making machine designed for overweight material by using pneumatic structure. Double feeding rods are convenient for conveying materials, which not only improves the efficiency but reduces the material waste. 2.Heating: Plastic glass making machine upper and down heating furnace, can move horizontally and vertically to ensure that the temperature of the plastic sheet is uniform during the production process. Sheet feeding is controlled by servo motor and the deviation is less than 0.01mm. The feeding rail is controlled by closed-loop waterway to reduce the material waste and cooling. 3.Mechanical arm: Plastic cup forming machine can automatically match the molding speed. The speed is adjustable according to different products. Different parameters can be set. Such as picking position, unloading position, stacking quantity, stacking height and so on. 4.Waste winding device: Plastic Cup Thermoforming Machine adopts automatic take-up to collect surplus material into a roll for collection. Double cylinder structure makes the operation easy and convenient. The outer cylinder is easy to take down when the surplus material reach a certain diameter, and the inner cylinder is working at the same time. This plastic glass machine operation will not interrupt the production process.

Application High speed paper cup machine can be used for tea, coffee, milk, ice cream, juice and water. Technical Parameter Paper Cup Size RANGE 2 ~~12OZ Speed 90~~120pc/min Paper cup top diameter in 45mm ~~Max 104mm Paper cup bottom diameter Min 35mm~~Max 75mm Paper cup height Min 35mm~~Max 115mm Raw material 180~~350gsm,single or double PE coating paper and PLA coated paper General power 11 Kw Electricity 380V 3 phases Air consumption 0.2 cbm/min Weight 3000 kg Electrical Configuration Inverter Schneider, France Relay Idec and Omron, Japan Switch Schneider, France PLC system SIEMENS, Japan Touch screen SIEMENS, Japan CONTACTORS Schneider, France

Technical Parameter Printing speed 55m-60m/min Printing color 6 colors Print max width 850mm Unwind roll width 860mm Unwind roll diameter 1300mm Rewind roll max diameter 1300mm Printing length 175-380mm Registering accuracy ±0.15mm Voltage 380V±10% Total power 50kw Air press 0.6MP Oil system Manual Weight 6000kg Dimension 6800mmX2100mmX2050mm Adjust speed motor 90W Main motor     4.0KW    Frequency conversion motor  7.5KW Magnetic clutch 200N  Huaguang Magnetic break 50N  Huaguang Rewind automatic tension control Chuying Unwind automatic tension control    Zhongxing Frequency converter 4.0kw  Schneider Frequency Converter 7.5KW Schneider Accessories Standard accessories 6pcs Gear motor 6pcs IR dry 1set Rewind unwind hydraulic system 1set AC contactor 1set Button 6pcs Temp control 6pcs Doctor blade 6pcs Ink fountain 1set Tool box 6pcs Bottom mat  

Product Introduction Single Station Automatic Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature ● More efficient energy use and material utilization. ● The heating station uses high-efficiency ceramic heating elements. ● The upper and lower tables of the forming station are equipped with independent servo drives. ● Single Station Automatic Thermoforming machine has a pre-blowing function to make the product molding more in place. Key Specification Model HEY03-6040 HEY03-6850 HEY03-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6