Injin Ci Gaban Thermoforming Masana'antu Illig - PLA Mai Rarraba Tafsirin Filastik Akwatin Abincin Abincin Rana Mai Rarraba Na'ura - GTMSMART

Dangane da farashi masu gasa, mun yi imanin cewa za ku yi ta nema daga nesa don duk wani abu da zai iya doke mu. Za mu iya bayyana da cikakkiyar tabbacin cewa don irin wannan ingancin a irin waɗannan farashin mu ne mafi ƙasƙanci a kusa daInjin Thermoforming mai arha,Injin Yin Kofin,Cikakkar Na'urar Yin Kofin Takarda Ta atomatik, Kamfaninmu yana sadaukar da kai don samar da abokan ciniki tare da samfurori masu inganci da tsayin daka a farashin gasa, yana sa kowane abokin ciniki gamsu da samfuranmu da sabis.

---

Injin Ci Gaban Thermoforming Masana'antu Illig - PLA Mai Rage Tafsirin Rubutun Filastik Akwatin Abincin Rana Mai Raɗaɗi - Injin GTMSMART Cikakken Bayani:

PLC Matsi Thermoforming Machine Tare da Tashoshi Uku HEY01

Gabatarwar Samfur

WannanInjin Thermoforming MatsiYafi don samar da nau'ikan kwantena filastik ( tire kwai, ganuwar 'ya'yan itace, kwandon abinci, kwantena kunshin, da sauransu) tare da zanen gado na thermoplastic, kamar PP, APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET, da sauransu.

Siffar

1. Haɗin injina, huhu da lantarki, duk ayyukan aiki PLC ne ke sarrafa su. Allon taɓawa yana sa aikin ya dace da sauƙi.
2. Matsi Da/Ko Vacuum forming.
3. Thermoforming Machine: Sama da ƙasa mold forming.
4. Ciyarwar motar Servo, tsayin ciyarwa za a iya daidaita matakin-ƙasa. Babban gudun kuma daidai.
5. Babban & ƙananan hita, dumama sassa huɗu.
6. Heater tare da tsarin kula da zafin jiki na hankali, wanda ke da madaidaicin madaidaicin, zazzabi iri ɗaya, ba za a iya aiwatar da shi ta hanyar ƙarfin lantarki ba. Low ikon amfani (makamashi ceton 15%), tabbatar da tsawon rayuwar sabis na dumama tanderun.
7. Ƙirƙira da yankan naúrar buɗewa da kusa da injin servo, samfuran ƙidaya ta atomatik.
8. Za a jera samfuran ƙasa.
9. Filastik Thermoforming Machine: aikin haddar bayanai.
10. Faɗin ciyarwa na iya aiki tare ko daidaita shi ta hanyar lantarki.
11. Mai zafi zai fitar ta atomatik lokacin da takardar ta ƙare.
12. Load ɗin takarda ta atomatik, rage nauyin aiki.

Ƙayyadaddun Maɓalli na Injin Thermoforming Filastik

Samfura	HEY01-6040	HEY01-6850			HEY01-7561
Mafi Girman Yanki (mm2)	600×400	680×500			750×610
3 Tashoshi	Ƙirƙira, Yanke, Tari
Fadin Sheet (mm)	350-720
Kauri Sheet (mm)	0.2-1.5
Max. Dia. Na Sheet Roll (mm)	800
Ƙirƙirar Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa (mm)	Babban Mold 150, Down Mold 150
Amfanin Wuta	60-70KW/H
Ƙirƙirar Motsi Nisa (mm)	350-680
Max. Ƙirƙirar Zurfin (mm)	100
Yanke Mold Stroke (mm)	Babban Mold 150, Down Mold 150
Max. Wurin Yanke (mm2)	600×400		680×500	750×610
Cutting Force (ton)	40
Busasshen Gudun (zagaye/min)	Max 30
Hanyar sanyaya samfur	Ta Ruwan Sanyi
Vacuum Pump	UniverstarXD100
Tushen wutan lantarki	3 lokaci 4 layi 380V50Hz
Max. Ƙarfin zafi	121.6
Max. Ikon Duk Injin (kw)	150
Max. Girman Injin (L*W*H) (mm)	11150×2300×2700
Nauyin Dukan Injin (T)	≈11

Alamar Babban Abubuwan Haɓakawa

PLC	Taiwan Delta
Allon taɓawa (inch 10)	Taiwan Delta
Ciyar da Motar Servo (3kw)	Taiwan Delta
Ƙirƙirar Motar Motar Servo (3kw)	Taiwan Delta
Samar da Motar Servo Mota (3kw)	Taiwan Delta
Yanke Motar Servo (3Kw)	Taiwan Delta
Yanke Motar Servo Mold (5.5Kw)	Taiwan Delta
Babban Motar Servo (1.5Kw)	Taiwan Delta
Mai zafi (192 inji mai kwakwalwa)	KYAUTA
AC Contactor	Faransa Schneider
Thermo Relay	Schneider
Matsakaicin Relay	Japan Omron
Sauyin iska	Koriya ta Kudu LS
Bangaren huhu	MAC. AirTAC/ZHICHENG
Silinda	China ZHICHENG

 

20 shekaru gwaninta

GTMSMART Machinery Co., Ltd. sabuwar sana'a ce ta fasaha wacce ke haɗa fasaha, masana'antu da kasuwanci. Ya fi haɓakawa da kuma samar da nau'ikan nau'ikan kayan aiki masu inganci na atomatik.

Sabuwar tsarin GTM da aka haɓaka na cikakken layin samar da iska mai sarrafa iska ta atomatik ya haɗa da:ciyar da naúrar, pre-dumama naúrar, forming naúrar, a tsaye blanking naúrar, tari naúrar, scrap winding naúrar, naushi yankan da stacking uku-in-daya kwance blanking naúrar, online lakabi naúrar, da dai sauransu, wanda za a iya hade tare da m samar line. bisa ga daban-daban samar da bukatun abokan ciniki.

---

Hotuna dalla-dalla samfurin:

---

Jagoran Samfuri masu dangantaka:

---

Kowane memba daga mu high efficiency sales team values ​​customers' needs and business communication for Factory Promotional Thermoforming Machine Illig - PLA Deradable Compostable Plastic Lunch Box Plate Bowl Tray Thermoforming Machine – GTMSMART , The samfurin zai wadata a duk faɗin duniya, kamar: Slovakia. , Italiya, Algeria, Idan kun kasance don kowane dalili ba ku da tabbacin wane samfurin za ku zaɓa, kar ku yi shakka a tuntuɓe mu kuma za mu kasance. na yi farin cikin ba ku shawara da taimaka muku. Ta wannan hanyar za mu ba ku duk ilimin da ake buƙata don yin zaɓi mafi kyau. Kamfaninmu yana bin ka'idodin "tsira da inganci mai kyau, haɓaka ta hanyar kiyaye kyakkyawan ƙima." Manufar aiki. Maraba da duk abokan ciniki tsoho da sababbi don ziyartar kamfaninmu kuma suyi magana game da kasuwancin. Muna neman ƙarin abokan ciniki don ƙirƙirar makoma mai ɗaukaka.

Na'ura Mai Rubuce-Rubuce Filastik

Injin Kwantenan Abinci

Inline Thermoforming Equipment

Mashin Thermoform

Filastik Kayan Kayan Abinci

Thermoform Cover Yin Machine

Thermoform Machines

Thermoforming Manufacturer

Kayayyakin Karɓar Thermoforming

Kayayyakin da aka karɓa kawai, mun gamsu sosai, mai samar da kayayyaki mai kyau, muna fatan yin ƙoƙarin dagewa don yin mafi kyau.
By Doris daga Aljeriya - 2017.02.28 14:19

---

Mu abokan tarayya ne na dogon lokaci, babu rashin jin daɗi a kowane lokaci, muna fatan ci gaba da wannan abota daga baya!
By Lee daga Tunisia - 2018.06.19 10:42

---