Product Introduction Four Stations Large PP Plastic Thermoforming Machine is forming, cutting and stacking in one line. It is completely driven by servo motor, stable operation, low noise, high efficiency, suitable for producing plastic trays, containers, boxes, lids, etc. Feature 1.PP Plastic Thermoforming Machine: High degree of automation, production speed. By installing the mold to produce different products, to achieve more purposes of one machine. 2.Integration of mechanical and electrical, PLC control, high precision feeding by frequency conversion motor. 3.PP Thermoforming Machine Imported famous brand electrical components, pneumatic components, stable operation, reliable quality, long using life. 4.The thermoforming machines has compact structure, air pressure, forming, cutting, cooling, blow out finished product feature set in one module, make the product process short, high finished product level, accord with national health standards. Key Specification Model GTM 52 4Station Maximum forming area 625x453mm Minimum forming area 250x200mm Maximum mold size 650x478mm Maximum mold weight 250kg Height over sheet material forming part 120mm Height under sheet material forming part 120mm Dry cycle speed 35 cycles/min Maximum film width 710mm Operating pressure 6 bar

Three Stations Negative Pressure Forming Machine HEY06 Application This Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, package containers, etc) with thermoplastic sheets. Three Stations Negative Pressure Forming Machine Features 1.Mechanical, pneumatic, electrical integration. Each action program is controlled by PLC. Touching screen operation is simple and convenient. 2.Vacuum Forming In-mould Cutting. 3.Up and down moulds forming type. 4.Servo feeding, length step less adjusting, high speed accurately and stablity. 5.Negative Pressure Forming Machine Up and down heater with two phases heating. 6.Electric heating furnace temperature control system adopts full computer intelligent automatic compensation control, partition control using digital input interface one by one, has the high precision fine-tuning, uniform temperature, heating up fast (only 3 minutes from 0-400 degrees), stability (not influenced by external voltage, temperature fluctuations no more than 1 degree), low energy consumption (energy saving about 15%), the furnace plate advantages for long life. 7.Forming and cutting station with open and close servo motor control, products with automatic tally output. 8.Products can be choosing by you to down stacking type,Or the manipulator is taken in the mold. 9.Plastic Thermoforming Machine with product information and data memory function. 10.Feeding caterpillar width can be synchronization automatic or discretely electric adjusting. 11.Heater automatic shift out device. 12.Mechanical loading device, reduce workers labor strength. Negative Pressure Forming Machine Technical Parameter Forming Area 850x780mm Max.Forming Depth 150mm Sheet thickness 0.2-1.5mm Work Efficiency Max. 30 cycles/ Min Air Pressure 0.9mpa Power Consumption 50-70kw/h Max. Sheet Width 760mm Suited Material PP, PS, PET, PVC Total Max. Power 110 Overall size(LxWxH）mm 10040x2600x3200 Total Weight (T) 7

Product Introduction Single Station Automatic Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature ● More efficient energy use and material utilization. ● The heating station uses high-efficiency ceramic heating elements. ● The upper and lower tables of the forming station are equipped with independent servo drives. ● Single Station Automatic Thermoforming machine has a pre-blowing function to make the product molding more in place. Key Specification Model HEY03-6040 HEY03-6850 HEY03-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6

PLA Degradable Compostable Plastic Lunch Box Plate Bowl Tray Thermoforming Machine Product Introduction This Thermoforming Machine Suitable material: PLA, PP, APET, PS, PVC, EPS, OPS, PEEK ect. Product type: various degradable plastic boxes, containers, bowls, lids, dishes, trays, medicine and other blister packaging products. Feature Mechanical, pneumatic and electrical combination, all working actions are controlled by PLC. Touch screen makes the operation convenient and easy. Pressure And/Or Vacuum forming. Thermoforming Machine: Upper and down mould forming. Servo motor feeding, feeding length can be step-less adjusted. High speed and accurate. Upper & lower heater, four sections heating. Heater with intellectual temperature control system,which has high precision, uniform temperature, won’t be effected by outer voltage.Low power consumption (energy saving 15%), ensure the longer service life of heating furnace. Forming and cutting unit mold open and close controlled by servo motor, products automatically count. Products be stacked downward. Plastic Thermoforming Machine: data memorization function. Feeding width can be synchronously or independently adjusted in electrical way. Heater will automatically push-out when the sheet is over. Auto roll sheet loading, reduce the working load. Thermoforming Machine Key Specification Model HEY01-6850 HEY01-7060 Max.Forming Area (mm2) 680x500 700x600 3 Stations Forming, Cutting, Stacking Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Cutting Mould Stroke(mm) Upper Mould 150,Down Mould 150 Max. Cutting Area (mm2) 680x500 750x610 Cutting Force （ton） 40 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6 Max. Power of Whole Machine (kw) 160 Max. Machine Dimension(L*W*H) (mm) 11000×2200×2500 Weight of Whole Machine ( T ) ≈13 Brand of Main Components PLC MCGS Touch Screen MCGS Feeding Servo Motor DELTA Forming Down Mould Servo Motor DELTA Forming Upper Mould Servo Motor   DELTA Cutting Down Mould Servo Motor    DELTA Cutting Upper Mould Servo Motor   DELTA Stacking Servo Motor DELTA Heating Brick OUTSTAND AC Contactor CHNT Thermo Relay CHNT Intermediate Relay CHNT Air Switch CHNT Temperature Controller AOYI Transducer OMDHON

Product Introduction Single Station Automatic Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature ● More efficient energy use and material utilization. ● The heating station uses high-efficiency ceramic heating elements. ● The upper and lower tables of the forming station are equipped with independent servo drives. ● Single Station Automatic Thermoforming machine has a pre-blowing function to make the product molding more in place. Key Specification Model HEY03-6040 HEY03-6850 HEY03-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6

Application Paper cups produced by HEY18A single PE coated paper cup machine can be used for tea, coffee, milk, ice cream, juice and water. Features It’s the ideal equipment for producing single-sided coated paper cups. This paper cup forming machine has unique design with a guard cover for heat dissipation that ensures longer life span. It features easy operation, stable performance, small occupying area, low consumption and high efficiency. It can run stably with little noise. This single PE coated paper cup machine runs lots of procedures including automatic paper feeding, side sealing, oiling, bottom punching, bottom pre-heating, bottom folding, bottom knurling, top curling and cup discharging. Technical Parameter Model HEY110A Size 3-16 OZ Material One-side PE film coated/laminated paper Material Thickness 150-180g/㎡; ±20g/㎡ Rated Productivity 50-75 pcs/min Power supply 380v/220v 50hz Total Power 4.8kw Weight 1680KG Dimensions 2750*1320*1750MM

Application Paper Bowl Making Machine is a multi-station automatic forming machine which adopts automatic paper feeding, sealing, oil filling, bottoming, heating, knurling and crimping. Such continuous processes as well as photoelectric detection, fault alarm, counting and other functions are ideal equipment for producing large-capacity calibers or food containers such as paper soup bowls, instant noodle bowls, convenient noodle bowl, breakfast bowl, and other paper food container bowls.

cup making machine Application The cup making machine is Mainly for the production of variety plastic containers ( jelly cups, drink cups, package containers, etc) with thermoplastic sheets, such as PP, PET, PE, PS, HIPS, PLA,etc. Cup Making Machine Technical Specifications Model HEY12-6835 HEY12-7542 HEY12-8556 Forming Area 680*350mm 750*420 mm 850*560 mm Sheet Width <680 mm <750 mm <850 mm Max. Forming Depth <180 mm <220 mm <180 mm Heating Rated Power 130kw 140kw 150kw Dimension 5200*2000*2800mm 5400*2000*2800mm 5500*2000*2800mm Machine Total Weight 7T 8T 9T Applicable Raw Material PP, PS, PET, HIPS, PE, PLA Sheet Thickness 0.2-3.0 mm Work Frequency <35 Motor Power 15kw Power Supply Three Phase 380V/50HZ Pressure Supply 0.6-0.8 Mpa Max.air Consumption 3.8 Water Consumption 20M3/h Control System PLC Delta Supply Sheet Rack Feeding Reducer with Motor Worm Gear Reducer (Supror) Pneumatic Pressure AirTAC Cylinder SC63×25=2PSC Pneumatic Feeding Sheet AirTAC Cylinder SC100×150=2PSC Electric Control Human-computer Interface Delta PLC Delta Servo Stretching Motor Delta 11KW servo driver+servo motor Servo Folding Motor Delta 15KW servo driver+servo motor Forming Station Standard square tube frame with 100*100, mould is casted steel and upper mould is fixed by nut. Opening and closing mould driven by eccentric gear connecting rod.Driving power by 15KW (Japan Yaskawa) servo motor, American KALK Reducer,main axis use HRB bearings. Plastic Cup Thermoforming Machine Main pneumatic component use SMC(Japan) magnetic. Sheet feeding device with planetary gear reducer motor, 4.4KW Siemens servo controller. Stretching device uses 11KW Siemens servo. Lubrication device is fully automatic. Caterpillars adopt fully enclosed structure, with cooling device and can manually adjust sheet width. Heating system uses China ceramic far-infrared heaters, stainless steel upper and down heating furnace, upper heater with 12 pcs heating pads vertically and 8 pcs heating pads horizontally , down heater with 11 pcs heating pads vertically and 8 pcs heating pads horizontally.(specification of heating pad is 85mm*245mm);Electric furnace push-out system uses 0.55KW worm gear reducer and ball screw, which is more stable and also protect the heater pads. Cup Thermoforming Machine Air filtration uses triplet, blowing cup can adjust airflow. Folding mould is consist of fixed upper plate、flexible mid plate and 4 pillars with surface hard chrome plating 45#. Eccentric is the construction of connecting rod fold mould, with running range ≤ 240mm. Electric heating furnace could be moved horizontally and vertically freely by guide-rail from Hiwin Taiwan. Top cups is controlled by AirTAC (Taiwan) cylinder. Waste Edge Winding Device On-line winding Reducer with 0.75KW motor (1 pc)

Paper Cup & Bowl Sleeve Machine Technical Parameter Model Ultrasonic Paper Cup Sleeve Machine Paper Bowl Size 6 oz-16 oz (mold exchangeable) height up to 125 mm Raw Material 170-360 g/m2 PE paper, varnishing printed paper, or other film coated paper (can be sealed by ultrasonic) Rated Productivity 50-65pieces/minute; Power Source 220V/380V/ 50Hz or other required Total Power 4 KW Total Weight 1000KG Package Size(L x W x H) 2450 x1200 x2000mm; Working Air Source 0.6Mpa, Air Out-put:0.3 m3/minute

Product Introduction Single Station Automatic Thermoforming Machine Mainly for the production of variety plastic containers ( egg tray, fruit container, food container, package containers, etc) with thermoplastic sheets, such as PP,APET, PS, PVC, EPS, OPS, PEEK, PLA, CPET,etc. Feature ● More efficient energy use and material utilization. ● The heating station uses high-efficiency ceramic heating elements. ● The upper and lower tables of the forming station are equipped with independent servo drives. ● Single Station Automatic Thermoforming machine has a pre-blowing function to make the product molding more in place. Key Specification Model HEY03-6040 HEY03-6850 HEY03-7561 Max.Forming Area (mm2) 600x400 680x500 750x610 Sheet Width (mm) 350-720 Sheet Thickness (mm) 0.2-1.5 Max. Dia. Of Sheet Roll (mm) 800 Forming Mould Stroke(mm) Upper Mould 150, Down Mould 150 Power Consumption 60-70KW/H Forming Mould Width (mm) 350-680 Max. Formed Depth (mm) 100 Dry Speed (cycle/min) Max 30 Product Cooling Method By Water Cooling Vacuum Pump UniverstarXD100 Power Supply 3 phase 4 line  380V50Hz Max. Heating Power 121.6

Biodegradable PLA Disposable Plastic Cup Making Machine Application Biodegradable cup making machine mainly for the production of variety plastic containers ( jelly cups, drink cups, package containers, etc) with thermoplastic sheets, such as PP, PET, PE, PS, HIPS, PLA,etc. Supply Sheet Rack Feeding Reducer with Motor Worm Gear Reducer (Supror) Pneumatic Pressure AirTAC Cylinder SC63×25=2个 Pneumatic Feeding Sheet AirTAC Cylinder SC100×150=2个 Main Technical Parameter  (Model) HEY12-6835 HEY12-7542 HEY12-8556 Forming Area 680*350mm 750*420 mm 850*560 mm Sheet Width <680 mm <750 mm <850 mm Max. Forming Depth <180 mm <220 mm <180 mm Heating Rated Power  130kw 140kw 150kw Dimension 5200*2000*2800mm 5400*2000*2800mm 5500*2000*2800mm Machine Total Weight  7T 8T 9T Applicable Raw Material PP, PS, PET, HIPS, PE, PLA(biodegradable) Sheet Thickness 0.2-3.0 mm Work Frequency <35 Motor Power  15kw Power Supply   Three Phase 380V/50HZ Pressure Supply  0.6-0.8 Mpa Max.air Consumption  3.8 Water Consumption  20M3/h Control System PLC Delta Electric Control Human-computer Interface Delta PLC Delta Servo Stretching Motor Delta 11KW servo driver+servo motor Servo Folding Motor Delta 15KW servo driver+servo motor   Forming Station 1.Plastic PLA biodegradable cup making machine standard square tube frame with 100*100, mould is casted steel and upper mould is fixed by nut. 2.Opening and closing mould driven by eccentric gear connecting rod. Driving power by 15KW (Japan Yaskawa) servo motor, American KALK Reducer,                     main axis use HRB bearings. 3.Biodegradable cup making machine main pneumatic component use SMC(Japan) magnetic. 4.Sheet feeding device with planetary gear reducer motor, 4.4KW Siemens servo controller. 5.Stretching device uses 11KW Siemens servo. 6.Lubrication device is fully automatic. 7.Caterpillars adopt fully enclosed structure, with cooling device and can manually adjust sheet width. 8.Heating system uses China ceramic far-infrared heaters, stainless steel upper and down heating furnace, upper heater with 12 pcs heating pads vertically and 8 pcs heating pads horizontally , down heater with 11 pcs heating pads vertically and 8 pcs heating pads horizontally. (specification of heating pad is 85mm*245mm); Electric furnace push-out system uses 0.55KW worm gear reducer and ball screw, which is more stable and also protect the heater pads. 9.Biodegradable plastic cup making machine air filtration uses triplet, blowing cup can adjust airflow. 10.Folding mould is consist of fixed upper plate、flexible mid plate and 4 pillars with surface hard chrome plating 45#. 11.Eccentric is the construction of connecting rod fold mould, with running range ≤ 240mm. 12.Electric heating furnace could be moved horizontally and vertically freely by guide-rail from Hiwin Taiwan. 13.Plastic cup making machine: Toping cups is controlled by AirTAC (Taiwan) cylinder. Waste Edge Winding Device 1.On-line winding 2. Reducer with 0.75KW motor (1pc)

Technical Parameter Printing speed 55m-60m/min Printing color 6 colors Print max width 850mm Unwind roll width 860mm Unwind roll diameter 1300mm Rewind roll max diameter 1300mm Printing length 175-380mm Registering accuracy ±0.15mm Voltage 380V±10% Total power 50kw Air press 0.6MP Oil system Manual Weight 6000kg Dimension 6800mmX2100mmX2050mm Adjust speed motor 90W Main motor     4.0KW    Frequency conversion motor  7.5KW Magnetic clutch 200N  Huaguang Magnetic break 50N  Huaguang Rewind automatic tension control Chuying Unwind automatic tension control    Zhongxing Frequency converter 4.0kw  Schneider Frequency Converter 7.5KW Schneider Accessories Standard accessories 6pcs Gear motor 6pcs IR dry 1set Rewind unwind hydraulic system 1set AC contactor 1set Button 6pcs Temp control 6pcs Doctor blade 6pcs Ink fountain 1set Tool box 6pcs Bottom mat